Factory Wholesale High Speed Tungsten Carbide Milling PCD Ball End
Mill
Non-ferrous metal materials,non-metal materials,and composite
materials
For finishing&semi-finishing(±4 μm)
Workpiece material
Nonferrous materials
Nonmetallic materials
Composite materials
Application Type
Semi-Finishing
Medium
Flute Type
Corner-R
Product Description
The tool is used for the processing of frames and shells such as
computer hard disk ,mobile phones,and the processing of some
non-ferrous material such as aluminum,magnesium,chin,silicon,etc.
as well as the processing of some non-metallic materials ,such as
fibermaterials ,insulating materials,plastics,composite
materials,etc.
Specification
| Specification | R radius | d Flute dia | H Flute length | L1 Cutting length | D Shank dia | L Overall | Z Teeth |
| DL-XL-501 | 1.5 | 3.0 | 3 | 5-8 | 6 | 50 | 1 or 2 |
| DL-XL-502 | 1.75 | 3.5 | 3 | 5-8 | 6 | 50 | 1 or 2 |
| DL-XL-503 | 2 | 4.0 | 4 | 8-10 | 6 | 50 | 1 or 2 |
| DL-XL-504 | 2.5 | 5.0 | 5 | 8-10 | 6 | 50 | 1 or 2 |
| DL-XL-505 | 3 | 6.0 | 6 | 10-15 | 6 | 50 | 1 or 2 |
| DL-XL-506 | 3.5 | 7.0 | 6 | 10-15 | 6 | 50 | 1 or 2 |
| DL-XL-507 | 4 | 8.0 | 7 | 15-20 | 8 | 60 | 1 or 2 |
| DL-XL-508 | 4.25 | 8.5 | 8 | 15-20 | 8 | 60 | 1 or 2 |
| DL-XL-509 | 4.5 | 9.0 | 8 | 15-20 | 8 | 60 | 1 or 2 |
| DL-XL-510 | 5 | 10.0 | 8 | 15-20 | 10 | 70 | 1 or 2 |
| DL-XL-511 | 5.5 | 11.0 | 9 | 15-20 | 10 | 70 | 1 or 2 |
| DL-XL-512 | 5 | 10.0 | 9 | 18-25 | 12 | 70 | 1 or 2 |
| DL-XL-513 | 6 | 12.0 | 10 | 18-25 | 12 | 70 | 1 or 2 |
| DL-XL-514 | 7 | 14.0 | 10 | 18-25 | 14 | 70 | 1 or 2 |
| DL-XL-515 | 7.5 | 15.0 | 11 | 22-28 | 16 | 70 | 1 or 2 |
| DL-XL-516 | 8 | 16.0 | 12 | 22-28 | 16 | 70 | 1 or 2 |
1.Feature:
a.Suitable for non-ferrous metal materials,non-metal materials,and
composite materials.
b.Can get a faster cut cutting speed and longer tool life, get high
surface quality and accuracy.
2.Design:
a.Circumferential edge band and passivation, improve the tool life
and stability of the cutting process.
b.PCD corner radius end mill cutter is a arc-shaped design, can
efficiently process narrow areas or curved surfaces.
c.PCD ball nose end mill cutter is a reasonable new type of
structural tool for machining complex curved surfaces on CNC
machine tools. It's one of the important tools used in complex 3D
surface finishing,it's for complest spatial surface.
 | 1.Double core diameter design ideal.:strong strength for plunge and
pocket milling ideal using on stainless steel
a.The small core diameter of the front end can ensure the chip
removal smooth ,take away the heat of cutting production, and
prevent the production of built-up edge.
b.The big core diameter at the back end ehance the rigidity of
cutting tools and improve the surface quality of products |
 | 2.a≠b Unequal design:prevents vibration and reduces cutting force
at slotting. This has led to the high speed and high feed machining |
 | 3.Variable helix to prevent vibration
Special variable pitch profile reduces cutting force and stress on
machine spindle |
Advantages
1.Ultrafine crystal grains, mirror processing effect, long service
life.
2.Surface finish less than 0.4u, mirror effect and very shinning.
3.Wear-resistant and very long work life, much more than carbide
materials.
4.Four times of cutting tool detection to ensure the quality
1) The first piece, the tail piece and the sampling inspection in
the production process with Helicheck PlusWalter equipment to full
inspection the Circumferential Rake, circumferential edge back
Angle, end tooth front Angle, end tooth back Angle, R Angle value
and profile, the profile of the forming knife
2) after production , full inspection by two dimensions measuring
instrument or Microscopic,flute number,outer diameter,flute length
,core diameter,helical angle,width of relief angle,End Tooth
Eccentricity and end tooth throught a center,Disc angle of end
tooth,Outside run-out and Whether there are notches, jagged
3) before coating Spot check by two dimensions measuring instrument
4)After coating full inspection by two dimensions measuring
instrument
FAQ
Q: Are you trading company or manufacturer?
Yes ,We are factory for more than 6+ years in CNC tools.
Q: How long is your delivery time?
Generally it is 5-10 days if the goods are in stock. or it is 15-20
days if the goods are not in stock, it is according to production
schedule.
Q: Do you provide samples? is it free or extra?
No, we don't provide free samples, we we can offer you some
discounts depends on your order quantity.
Q: What is your terms of payment?
T/T 30% deposit, balance before shipment. More payment terms
available(Paypal, Western Union)
Q: Do you provide OEM/ODM service?
Yes, we do. OEM is accepted with your drawing. ODM with your brand
lase in the products by our laser machine and label of the OEM
brand would be stuck on the box before goods shipped out.
