HDMI to RJ45 Signal Extender 60M 1080P over Single CAT5E/6
Technical Parameters
| Video | Standards | HDMI 1.3; HDCP 1.2 |
| Maximum pixel clock | 165MHz |
| Maximum data rate | 6.75Gbps |
| Resolution | 1920X1080P@60Hz |
| Connector | HDMI-A |
| Impedance | 100Ω |
| IR | Interface | 3.5mm seat |
| Signal direction | Unidirectional |
| | |
| Signal type | Digital |
| IR frequency | 38kHz |
| UTP | Interface | RJ45 |
| Transmission distance | CAT5e/6 |
| Other | Power supply | The power adapter: DC 5V/1A |
| Power dissipation | MAX 3W |
| Operating Temperature | -20℃ ~ +70℃ |
| Operating Humidity | 5% ~ 90% |
Overview
The Extender uses single cat-5E or cat-6(recommended) cables
instead of HDMI cable to transmit high definition signal up to 60
meters, cutting down the cost. The Extender is designed to supply
for long distance transmission of high definition signal. Our
devices offer solutions for noise, space and security concerns,
data center control, information distribution, conference room
presentation, school and corporate training environments.
Features
◆ Locking power supply connector providesadded security
◆ Full digital, Uncompressed HD optical fiber transmission
◆ Exact match HDMI1.3b standard,HDCP1.1 protocal,support CEC With
Independent analog audio
◆ Automatic identification and configure display mode
◆ Support resolution up to 1080P60 and below
◆ Single mode,multi mode optical transmission
◆ ESD protection circuit inside, to ensure the ESD damage.
◆ Easily to installation, plug and play, no need to set up
◆ Supports multi-mode and single-mode fiber optic cables using LC
optical connectors
◆ Support HDMI 1.4a;
◆ Support highest video resolution 1080p/60Hz;
◆ Support 1.65Gbps data rate and tmds clock up to 165MHz;
◆ Support 8/10/12 bit deep color;
◆ Support AWG26 HDMI standard cable, input up to 15 metres, output
up to 20 metres;
◆ Signal transmission: By using single cat-5e or cat-6(recommended)
cable instead of HDMI cable, it can extend the distance up to 60
meters between TX and RX;
◆ No loss of quality;
◆ Install in minutes;
◆ Need DC5V/1A power supply.
◆ Optical link does not require any copper cable connections
◆ Optical link is immune to environmentalsignal noise
◆ Low RFI / EMI profile for sensitive applications
◆ Supports IR back channel over optical link
Product picture
Packaging & Shipping
● All of our package are international standard package
● We will deliver our products as soon as the order confirmed
