Red Pipe Welding Positioners, Load Capacity 10T, Rotoary and
Tiltling Welding Turntable
Model HBJ-100
- Load capacity 10000kg maximum
- Table diameter 2000mm
- Tilting angle 0-90°/ 0-120°
- Tilting speed 0.14 rpm
- Tilting power 4 kw
- Rotation speed 0.05-0.2 rpm
- Rotation power 3 kw
- Control way Remote hand control + Foot pedal
- Input Voltage 110V ~ 575V Single/3 Phase 50/60Hz
- Certificate CE approva
Description
1. Worktable turning use AC motor, which speed can be variable
adjustable, high precision.
2. It turning accord to the required speed, thus greatly improved the welding
quality,working productivity.
3. This equipment can coordinate with different automatic welding
and manual welding, pipe longitudinal
joint, and end welding, all kinds axis, tray, pipe welding, which
with compact structure, small size, beauty
appearance, light, and easy for operation.
Detail 10T Pipe Welding Positioner Specification
| Model | HBJ-100 |
| Load capacity | 10000kg maximum |
| Table diameter | 2000mm |
| Tilting angle | 0-90°/ 0-120° |
| Tilting speed | 0.14 rpm |
| Tilting power | 4 kw |
| Rotation speed | 0.05-0.2 rpm |
| Rotation power | 3 kw |
| Control way | Remote hand control + Foot pedal |
| Input Voltage | 110V ~ 575V Single/3 Phase 50/60Hz |
| Certificate | CE approval |
Competitive Advantage
1. Offer tilting and electric mechanical rotation
2. Capacities from 100 Kg to 100 Tons
3. Automatic PLC control system accurate to ± 1 mm
4. Slide positioning for varying fixture lengths
5. Low-maintenance brushless motor
Product Application:
With the working bench going up or going down, turning and
manipulating, the work piece stays in the best position for being
welded or assembled.
Supply Range
1. Welding positioner (including machine frame, worktable, etc)
1set
2. Electric control system (including electric control
cabinet,remote control box and foot
3. Technical documents (with manual book, conformity certificate,
packing list, etc) 1set
Installation and commissioning
1. Normally it is easy to installation, we will installtion well
then package for delivery. Also we will supply you
all the details installation drawings.
2. If customer need installation and commissioning,we’ll send 3
workers to customer’s factory ,including one machinery worker,one
electrician and one translator.But customer should pay the cost of
installation and commissioning.
