Automatic Low-E Glass Film Edge Grinding Machine For Deletion Of
Low-E Film
Vertical Low-E glass film deletion machine for making double
glazing glass is used to deleting the film on the low-e glass with
fast speed. Automatic Low-E deletion machine can delete rectangle
glass and shape glass, it has 6 servo motors.
Main Features of Automatic Low-E deletion machine:
Six sets of servo motors,British TRIO system
Delete double and triple silver low-e glass
Automatically measure glass size
Automatically distinguish low-e surface
PLC control system, touch screen interface
Six servos control system
Intelligent control system, can recognize batch processing
Edge deletion is adjustable
The head can be rotated 360°Safe and full automatic device
Technical parameter
| Max glass size | 2500mm*4500mm |
| Min glass size | 350mm*500mm |
| Wheels width | 10mm, 12mm, 15mm |
| Deletion width | 10mm - 150mm |
| Glass thickness | 3-15mm |
RFQ :
1. What is the function of Low-E film deletion machine?
Low-E film deletion machine is to remove the edge film of Low-e
glass
2. Why should deleting low-E glass film?
To prevent the film from oxidizing when the insulating glass is
synthesized.
3. What glass needs to be deleted?
When off-line Low-e glass
4. In addition to using the vertical film deletion machine to
delete film, what other ways can remove film?
Manual, horizontal edge grinding machine, bilateral edge grinding
machine, four-edge edge grinding machine, cutting machine, etc
5. What are the advantages of using our film separator? What are
the disadvantages? What are the advantages of using other methods?
What are the disadvantages?
With our vertical film rdeletion machine can be connected to use,
save labor, film removing effect is good, glass flatness is good,
can be in addition to the large plate glass. Disadvantage is to
increase the length of the whole line, cover a large area.
Manual film removal effect is poor, slow speed. The others are film
removal before toughening, because the heating time of white glass
and Low-e glass during toughening is not the same, it will cause
glass deformation, advantage does not need too high investment.
6. Is glass before toughening divide film is good still after
toughening divide film is good? Why is that?
After toughening, film removal is good, glass deformation is small.
7. What brand of PLC, servo motor driver, frequency converter is
used to deletion machine?
At present, delta PLC servo motor and drive, inverter delta and
schneider
8. How many sections does the film deletion machine divide into?
What are the dimensions of each segment? What are the roles?
The film deletion machine is divided into three sections, the first
or the third section is 2.2 meters, mainly for glass input and
output and storage of glass, the middle section 5.3 meters, mainly
for film deletion.
9. Can the device distinguish the low-e film surface?
The film layer can be detected automatically.
10. Do you need to input the length and width of the glass when
using the film remover?
No, it's automatically detected.
Company Introduce :
Related Products
Vertical Insulating Glass Production Line LJBZ2535G
Main Features:
• Adopt SIEMENS control system, keep stable performance
• PLC control system, touch screen interface
• Automatically adjust the depth of glue with digital display
• Using servo to control system, modular function, superposition
function
• Applicable to produce stepped IG, triple IG and shaped IG
• Two pieces of IGU can be made and filled with argon gas in one
time (Optional)
• Min & Max glass sizes can be optional
• Glass washing part
Main feature:
• Using 6 pieces of soft brushes
• Wash online and offline low-e glass, automatically recognizes
Low-e film
• Washing part adopts the design of upper and lower layered
structure
• Adopt variable frequency fan, energy efficient, good cleaning
effect
• The air knife can automatically adjust the width of the air knife
according to the thickness
• Using intelligent intermittent energy-saving working methods
• Hierarchical type washing system
• Water tank automatic temperature control, water replenishing
system
• European silencer system
• 304 stainless steel materials
• Pressing and filling gas parts
Main feature:
• Ultra-long insulating glass can be compressed with second times
• The machine adopts servo torque to pressing glass
• The pressing plate with adjustable screws to guarantee
long-lasting high-precision tablet
• Equipped with a precisely adjustable front platen mechanism
• The system can diagnose fault information
• The pressing plate can be opened to 400mm width for easy
maintenance
• Applicable to produce four-side step IG, triple IG and shaped IG
- Filling argon gas automatically
• Automatically filling argon gas inside the pressing plate with
precise gas concentration
• When filling shaped IG, inflatable front side of the rectangular
size required 450mm (length), 280mm (high)
• No need to drill holes in spacer frame
• Standard gas is Argon gas
• Fast reacting sensor for permanent control of gas filling process
• Automatically set gas data and display data on the screen
