Pneumatic Yokohama Fender SUS304 Stainless Steel Flange
Marine pneumatic fender tyre chain nets are selected as follows:
Tire chain network is divided into: ordinary car tires, truck
tires, airplane tires; Aircraft tires have the most wear resistance
(but the cost is relatively higher), the use of chains, shackles
must be hot-dip galvanized; The protective pipe should be covered
outside the chain, which is to protect the chain from wearing the
fender body and the hull from being damaged.
Yokohama pneumatic fender mode of transportation:
Large yokohama pneumatic fender often encounter the problem of
over-wide and over-high containers being unable to be shipped
during transportation. In fact, we can release the gas on the
ship's fender and then fold it, so that neither the container nor
the trailer will refuse to ship or increase the high transportation
cost due to the over-wide and over-high. But the ship pneumatic
fender deflating manufacturers are also to experience, can not
blindly deflating.
Common dimensions and performance table of pneumatic rubber fender:
| SIZE | Initial pressure is 80 kPa Compression deformation 60% |
| Diameter(mm) | Length (mm) | Reactionforce-kn | Energyabsorb kn-m |
| 500 | 1000 | 87 | 9 |
| 600 | 1000 | 100 | 10 |
| 700 | 1500 | 182 | 28 |
| 1000 | 1500 | 241 | 40 |
| 1000 | 2000 | 340 | 54 |
| 1200 | 2000 | 392 | 69 |
| 1350 | 2500 | 563 | 100 |
| 1500 | 3000 | 763 | 174 |
| 1700 | 3000 | 842 | 192 |
| 2000 | 3500 | 1152 | 334 |
| 2000 | 4000 | 1591 | 386 |
| 2500 | 4000 | 1817 | 700 |
| 2500 | 5500 | 2655 | 882 |
| 3000 | 5000 | 2715 | 1080 |
| 3000 | 6000 | 3107 | 1311 |
| 3300 | 4500 | 2478 | 1642 |
| 3300 | 6000 | 3654 | 2340 |
| 3300 | 6500 | 3963 | 2534 |
Pneumatic ship fender structure:
1.Pneumatic ship fender is divided into: inner rubber layer,
reinforced cord layer, outer rubber layer.
2.Function of inner adhesive layer: shape for fender, enhance air
tightness and ensure no air leakage.
3.Enhance connection layer: improve the strength of the transverse
fender, increase the tensile strength, increase the pressure.
4. Outer layer: improve the wear resistance of Marine fender,
better protect the inflatable rubber fender body, prolong the
service life.
Pneumatic rubber fender structure diagram and compression
deformation test
Pneumatic rubber fender product case
Service tenet:
Integrity management, quality first; Create a world famous brand,
do a hundred years of enterprise;
Rigorous and pragmatic, considerate; Serve every user attentively.
After-sales service:
1. All products of the company are produced in strict accordance
with ISO17357:2014 standards.
2, the company's products in normal use, the life of 8-10 years.
3, the company will carry out strict inspection on each product
before leaving the factory, to ensure that all products without any
quality problems before leaving the factory, so that every user can
rest assured with.
4, the company's product quality warranty period of 2 years,
quality problems occurred during the warranty period free repair or
replacement.
5. Responsible for guiding repair and maintenance process, and
long-term supply of repair materials and tools.
6. Instruct or participate in the implementation and application of
products to various projects.
7. Provide pre-sale, in-sale and after-sale services
