Horseshoe Probe Portable Multifunction Magnetic Particle Flaw
Detector HCDX-I
Magnetic particle flaw detector is a nondestructive testing
equipment for surface and near surface crack defects of all kinds
of ferromagnetic parts.
Magnetic particle flaw detector can detect parts with hidden crack
defects under the premise of not destroying the material of the
detected parts and not affecting the performance of the detected
parts. It is an important quality testing equipment for product
quality control of parts manufacturing enterprises.
The importance of magnetic particle flaw detector:
1, can find the hidden defects of ferromagnetic raw materials, to
avoid the loss of parts processing costs;
2. Recessive defects of ferromagnetic parts can be found to avoid
the occurrence of safety accidents;
3, can find the process defects in the processing process of
ferromagnetic parts, improve the processing technology;
4. Fatigue cracks in the stress concentration zone of ferromagnetic
parts can be found to improve the design process.
Introduction:
HCDX-I composite magnetic powder flaw detector adopts silicon
controlled contactless switch, with low noise, strong magnetic
force, long service life and simple operation, suitable for field
and laboratory use. The instrument adopts combined configuration,
and users can choose probe freely according to their needs.
Application:
Mainly used to detect surface and near surface cracks of
ferromagnetic workpiece.
Boiler pressure vessel, steel structure, forgings, castings,
welding parts, machined parts, etc.
The standard probes introduction for model HCDX-I:
Type D probe (electromagnetic yoke probe): equipped with movable
joints, can magnetize and detect the surface workpiece.
Type A probe (horseshoe probe): suitable for all kinds of fillet
weld, large workpiece inside and outside corners of local
magnetization inspection, equipped with working lights.
Technical parameters:
Power supply: AC 220V ± 10% 50HZ 5A
Output: AC 38V 10A
Type A.D.E.O probes are optional and available
Inspection speed: ≥6 m/min
Temperature rise of probe: ≤60℃
Working beat: it is recommended to work for a long period of
continuous operation: magnetizing time ≤3 seconds, gap time ≥5
seconds
Weight: about 6.5Kg (main unit)
All optional probes parameters:
| D type probe | Lifting force: AC≥5Kg DC≥18Kg (no joints) Pole distance: 50-200mm (adjustable) Operating current: ≥8A Working voltage: AC=38V, DC=9V Weight: 2.5 Kg |
| Ａtype probe | Lifting force: AC≥ 4.5kg DC≥18Kg Pole distance: 20-160mm (adjustable) Working voltage: AC=38V, DC=9V Weight: 2.0 Kg |
| Ｏtype probe | Central magnetic intensity: 180Oe Working voltage: AC=38V Inside diameter: 150 mm Weight: 2.5 Kg |
| Ｅtype probe | Lifting force: ≥12Kg Distance: 110 mm Operating current: ≥7A Inspection speed: 6 m/min Working voltage: 38 v left, 2 Weight: 3.0 Kg |
Standard delivery:
Host HCDX-I 1
Type D yoke probe 1
Type A probe 1
The power line 1
The probe line 1
Standard specimen 1
Operation manual 1
Certificate 1
Optional accessories:
O the probe
E probe
Dead weight
UV light
Test specimen
