Rotating Magnetic Field Probe Portable Multifunction Magnetic
Particle Flaw Detector HCDX-E
Introduction:
HCDX-E composite magnetic powder flaw detector adopts silicon
controlled contactless switch, with low noise, strong magnetic
force, long service life and simple operation, suitable for field
and laboratory use. The instrument adopts combined configuration,
and users can choose probe freely according to their needs. Type A,
D, E, O probe can be configured according to user requirements.
The importance of magnetic particle flaw detector:
1, can find the hidden defects of ferromagnetic raw materials, to
avoid the loss of parts processing costs;
2. Recessive defects of ferromagnetic parts can be found to avoid
the occurrence of safety accidents;
3, can find the process defects in the processing process of
ferromagnetic parts, improve the processing technology;
4. Fatigue cracks in the stress concentration zone of ferromagnetic
parts can be found to improve the design process.
Application:
Mainly used to detect surface and near surface cracks of
ferromagnetic workpiece.
Boiler pressure vessel, steel structure, forgings, castings,
welding parts, machined parts, etc.
The standard probes introduction for model HCDX-E:
Type E probe (rotating magnetic field probe): conduct an all-round
flaw detection for all kinds of straight welds, girth welds, butt
welds and plane and curved surface with large geometric shapes. The
probe is equipped with roller, which facilitates the operation and
increases the speed. The probe is equipped with working lights for
easy observation.
Technical parameters:
Power supply: AC 220V ± 10% 50HZ 5A
Output: AC 38V 10A
Type A.D.E.O probes are optional and available
Inspection speed: ≥6 m/min
Temperature rise of probe: ≤60℃
Working beat: it is recommended to work for a long period of
continuous operation: magnetizing time ≤3 seconds, gap time ≥5
seconds
Weight: about 6.5Kg (main unit)
E probe: 3kgs
All optional probes parameters:
| D type probe | Lifting force: AC≥5Kg DC≥18Kg (no joints) Pole distance: 50-200mm (adjustable) Operating current: ≥8A Working voltage: AC=38V, DC=9V Weight: 2.5 Kg |
| Ａ type probe | Lifting force: AC≥ 4.5kg DC≥18Kg Pole distance: 20-160mm (adjustable) Working voltage: AC=38V, DC=9V Weight: 2.0 Kg |
| Ｏ type probe | Central magnetic intensity: 180Oe Working voltage: AC=38V Inside diameter: 150 mm Weight: 2.5 Kg |
| Ｅtype probe | Lifting force: ≥12Kg Distance: 110 mm Operating current: ≥7A Inspection speed: 6 m/min Working voltage: 38 v left, 2 Weight: 3.0 Kg |
Standard delivery:
Host HCDX-E 1
Type E probe 1
The power line 1
The probe line 1
Standard specimen 1
Operation manual 1
Certificate 1
Optional accessories:
Type A probe
O probe
D probe
Dead weight
Test specimen
UV light
