DC12v 35mm long stroke push-pull open frame solenoid Small
electromagnet 2 buyers
Packaging & Delivery
Selling Units:Single item
Single package size:20X20X20 cm
Single gross weight:1.000 kg
Package Type:pp box packin
Lead Time
| Quantity(Pieces) | 1 - 20000 | >20000 |
| Est. Time(days) | 15 | To be negotiated |
Product Description
* Electrician pure iron shell, less residual magnetism, integrated
molding, stronger magnetic permeability
* Built-in core, more conductive and low power consumption
* Power-driven core load off by the spring return(Please note,
relatively soft springs, only the iron core reset) Push nut
convenient headband fixed object, such electromagnet by impact
work. Inertial force huge impact.
* Suitable For: Vending machines, transport equipment, office
facility household appliance, mechanical, etc.
* Three months can be returned, half a year can be exchanged
Rated voltage:DC12V
Current: 8A
Usage range: Wide range of use, home appliances, vending machines,
game consoles, car door locks.
Package include: 1pc x Small electromagnetic Electric Magnet
Note:
Please note that as an automation device actuator. Because the
current, single-cycle not long power for point formula work. Single
power work time within 2 seconds of the best! Long energized coil
will cause a short circuit is similar to artificial
electromagnet overheat temperature is too high will affect the life
of the electromagnet.
Packing & Delivery
ODM/OEM Order Notes
1 Voltage/current required for solenoid valve ?
2 Form factor What is the required size?
3 Please provide solenoid valve needs air flow or other use flow
rate .
4 Solenoid valve operation time after demand energization and
power-off time after completion of the operation, (energization and
power-off time of a single operation are cycles)
5 Whether there are special requirements for the use of ambient
temperature or waterproofing and chemical resistance
6 Appearance of salt spray test required or not (regular 24 hours)
7 Solenoid valve seal pressure, valve opening size and controlled
substances (water, air, gas, oil)
8 Are there any other requirements?
9 Sample quantity required, cycle time (regular 3 days / custom 4
weeks or more depending on the actual situation), estimated
quantity of post-production, how long to place the order, typical
daily capacity is 5K .
