Cast or Extrude Magnesium Zinc Rare earth alloy round Billet ZE10
ZE20 ZE90 ZE41
with high strength and performance
| Type/Chemicals | Mg | Al | Zn | Mn | Re |
| | (max) | | (max) | |
| ZE10 | Balance | - | 1.0-1.5% | - | 0.12-0.22% |
| ZE20 | Balance | 0.02% | 1.8-2.4% | 0.5-0.9% | 0.1-0.6% |
| ZE90 | Balance | 0.0001% | 8.5-9.0% | 0.01% | 0.45-0.5% |
Customized alloys are available.
Lightweight is an important trend in the development of aerospace
materials. The advantages of reducing the mass of the fuselage and
various parts are obvious: it can reduce fuel consumption, increase
load, extend aircraft flight time, and reduce flight costs. The
data shows that for every 1 pound of aerospace material reduction,
the cost of commercial aircraft can be reduced by 300 dollars;
fighter jets can be reduced by 3,000 dollars; and spacecraft can be
reduced by 30,000 dollars. This shows that the lightweight of
aerospace materials has an important impact on the cost of
spacecraft. In addition, while saving costs, the reduced mass of
high-speed aircraft can also greatly reduce inertia and improve
flight performance. The density of magnesium is 1.74 g/cm3. Adding
some alloying elements to magnesium to form magnesium alloy is
still the lightest among many aerospace metal materials. It is only
equivalent to the density of engineering plastics, but its strength
and stiffness are much higher than engineering plastics. Therefore,
if magnesium alloys can be widely used in aerospace, it will bring
huge weight reduction benefits and cost savings.
Company Brief Introduction:
China Hunan High Broad New Material was founded in 2006, focus on
the business in advanced new material and service. Including:
design, installation, material , engineering, maintenance and
technical support.
Our sales office located in Changsha, Hunan province, plant located
in Hunan,Shanxi, Henan,Guizhou province.Our business scope
including : Cathodic protection products for fresh water and marine
anti-corrosion products such as magnesium anodes,Aluminum anodes
,Zinc anodes etc.;Master alloy for aerospace ; Aluminum alloy ,
Magnesium investment castings industry; Magnesium alloy profile
:Extrusion/hot rolled billet, plates,bars etc .for various civil &
military industry,such as grade AZ31B,AM80,WE43,ZK60 etc.; high
wear-resistance & hardness ceramic products for sandblasting nozzle
& bulletproof plate for armor vest, armor vehicle.
Along with strong economic development in China, we expand our
business very well, Product capacity is over 5000mt per
year.Turnover reach to USD20,000,000.00 per year.
Our Products are widely accepted and recognized by clients
worldwide including Europe, North America, East Asia, Middle east
etc..
Our R&D department have strong technical design capacity. We
closely cooperated with colleges and universities, supply the
service for various companies in China and overseas.
Believe we can be your long term and reliable supplier .
Magnesium has good machinability, which means good casting
properties. Compared with other materials, its manufacturing cost
is very low, as shown in Table 4. It is worth noting that although
the price per kilogram of magnesium ingot is a little more
expensive than that of aluminum and iron, its finished product
price per unit volume is almost the same.
The physicochemical properties of magnesium make it more suitable
than aluminum for die casting large components. The latent heat of
fusion per unit volume of magnesium is only 2/3 of that of
aluminum, the specific heat is only 3/4 of that of aluminum, and it
has very low iron solubility. These properties allow magnesium die
castings to achieve almost the same production cost per kilogram as
aluminum. If the highly productive HOT RUNNER technology (such as
the latest achievement of THIXOMAT) is applied, the production cost
of magnesium die-cast parts is much lower than that of aluminum.
Contact me for catalogs:
Ms.Vivian Jiang
-----------------------------------------------
China Hunan High Broad New Material Co.Ltd.
70 Chezhan North Road,Changsha, China 410100
Tel:+86-731-85717705 Fax:+86-731-85716569
Mobile/Whatsapp: +86-139-7488-3816
Email: vivian@hbnewmaterial.com, metal@vip.163.com
Skype: vivian.jjy
