Stainless Steel 304/316 Water NPT Thread 1PC Ball Valve
1. 1PC ball valve is open when the ball's hole is in line with the
flow and closed when it is pivoted 90-degrees by the valve handle.
2. 1PC ball valve ' s material is stainless steel 304 / 316 , use
investment castng method, the 1PC ball valve is thread type, can
machining PT,NPT,BSP,G thread type,this type of 1PC ball valve is
with locking.
3. 1PC ball valve are durable, performing well after many cycles, and
reliable, closing securely even after long periods of disuse.
4. These qualities make them an excellent choice for shutoff
applications, where they are often preferred to gate and globe
valves, but they lack their fine control in throttling
applications.
1PC ball valve is mainly used to cut off, distribute and change the
flow direction of medium in pipeline. 1PC ball valve is a new type
of valve widely used in recent years. 1PC ball valve has the
following advantages:
1. The fluid resistance is small, and 1PC ball valve resistance
coefficient is equal to that of the same length of pipe.
2. Simple structure, small volume and light weight.
3. 1PC ball valve is tight and reliable. At present, the sealing
surface material of ball valve is widely made of plastic with good
sealing performance, and it has been widely used in vacuum system.
4. Convenient operation, fast opening and closing, from full
opening to full closing as long as 90 ° rotation, convenient for
remote control.
5. Easy maintenance, simple structure of ball valve, movable
sealing ring, easy disassembly and replacement.
Material List
| ITEM | PART | MATERIAL | QTY |
| 1 | BODY | A216-WCB | A351-CF8 | A351-CF8M | 1 |
| 2 | CAP | A216-WCB | A351-CF8 | A351-CF8M | 1 |
| 3 | SEAT | PTFE | 2 |
| 4 | BALL | 304 | 304 | 316 | 1 |
| 5 | STEM | 304 | 304 | 316 | 1 |
| 6 | THRUST WASHER | PTFE | 1 |
| 7 | PACKING | PTFE | 1 |
| 8 | GLAND NUT | 304 | 304 | 304 | 1 |
| 9 | HANDLE | 304 | 304 | 304 | 1 |
| 10 | HANDLE COVER | PLASTIC | 1 |
| 11 | NUT | 304 | 304 | 304 | 1 |
| 12 | SPRING WASHER | 304 | 304 | 304 | 1 |
Dimension Table
| SIZE | Φ d | L | H | W | N.M | KGS |
| DN6 | 1/4” | 6 | 41 | 34 | 68 | 4 | 0.06 |
| DN10 | 3/8” | 8 | 45 | 37 | 68 | 4 | 0.09 |
| DN15 | 1/2” | 10 | 57 | 38 | 94 | 6 | 0.18 |
| DN20 | 3/4” | 11.5 | 59 | 42 | 94 | 6 | 0.26 |
| DN25 | 1” | 16 | 72 | 53 | 102 | 8 | 0.40 |
| DN32 | 1-1/4” | 20 | 78 | 56 | 102 | 10 | 0.64 |
| DN40 | 1-1/2” | 25 | 83 | 65 | 127 | 14 | 0.85 |
| DN50 | 2” | 32 | 100 | 70 | 127 | 16 | 1.48 |
Drawing
FAQ
Q: Are you trading company or factory?
A: We're factory and worked in stainless steel products with more
than one decade, OEM ODM are all available for us.
Q: How can i get samples?
A: Generally we'd like to offer samples for checking quality and
testing, please take on samples cost and freight on your side at
first, will make refund all these cost in your first order
Q: What's your MOQ ?
A: MOQ is 1000 usually. But MOQ of each product is different.
Q: Can you provide OEM/ODM service?
A: Sure, we are ready to meet all your demands!
Q:How to proceed an order for valve?
A: Firstly let us know your requirements or application. Secondly
We quote according to your requirements or our suggestions. Thirdly
customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q.What are your quality control procedures?
A: We adhere to strict quality control procedures that begin with
product design and carry through to the end of the production
process using state-of -the-art quality control equipment.
