Multi Chamber Poly Trap
Specifications / Size
5 chambers & Disposable (Single Use)
Fast installation (Easy to operate)
Clear & visible monitor
Efficient polyp capture
Easy sample retrieval
ETO Sterile individual package
Reduce biohazard and sample contamination
Product Usage
This product is designed to install easily between the endoscope
and the suction receptacle eliminating the need to retrieve polyps
from collected endoscope effluent. 5 chambers collect the polyps as
they are retrieved through the endoscope channel, isolating each
for identification and pathological analysis.
Other Description
1. Advantage
· Reduce risk of lost colonic tissue
· Eliminate manual manipulation after retrieval
· Large numbered chambers for quick, easy transfer and accurate
specimen identification
· Single use to prevent cross-contamination and protect your patients
· Light weight, flexibly carry.
2. Features
Save time
· Easy in-line installation. In just a few seconds, the trap can be
installed between the endoscope and suction receptacle
· Save procedure time by eliminating hand screening and filtering to
find the specimen
Easy Operation
· Fine-mesh screen allows it to capture even the smallest polyps
· Multi-chamber allows for multiple samples, andpermit accurate
identification and localization of each polyp
· Clear plastic construction allows visual verification of polyp
collection
Avoid Contamination
· EO sterile & hygienic individual packaging to reduce biohazard and
sample contamination
· Reduces contact with patient effluent
As Lab transport device
· The unit can be filled with fixative and sealed for easy and safe
transport to the pathology lab
User Instruction
1. Connect tube on center port of trap to suction system
2. Connect outside port to endoscope
3. Rotate jar to align arrow on lid with any open (o) position for
normal suctioning
4. To entrap first polyp, rotate jar and align arrow with number 1.
5. After the polyp is trapped, repeat step 3 for normal suctioning
as needed
6. Repeat step 4 for positions 2, 3, and 4 for each additional
polyp (same patient only)
7. Disconnect tubing from endoscope and suction system; then remove
center tube from suction polyp trap lid
8. Fill suction polyp trap with fixative through center port or
after removal of lid. Replace lid when fixative filling is complete
9. Bend outer tube to cover both outer and center ports
10. Unit is ready for transport to laboratory
11. This product is for single use only, do not reuse
