Semi Auto Corrugated Flute Box 5 Layer Paper Laminating Machine
1.The Introduction of Laminating Machine
The laminating machine function is laminting 3 layer .5 layer paper
. It is not only laminting corrugated box , but also cardboard
paper .
This laminating machine is semi automatic type . The feeder need
worker feed raw material by manual . the laminating part is
automatic .
There are 3 size for this machine, one is 1300mm , one is 1450 mm,
another is 1600 mm . You may based on your require to choose .
2. The Techncial of Laminating Machine
| Model | Max laminating size | Min laminating size | Speed | Power |
| JGF-1300 | 1400*1300 mm | 350*350 mm | 90 pcs / min | 7KW |
| JGF-1450 | 1400*1450 | 350*350 mm | 90 pcs / min | 7KW |
| JGF-1600 | 1400*1600 | 350*350 mm | 90 pcs / min | 7KW |
3. The Function of Laminating Machine
(1) Suction floating-feed paper, running balance is accurate.
Photoelectric control to avoid single - sheet walking. The machine
adopts forward push position: the error range is within 1.0mm, and
the fitting error range of corrugated paper is within 1.5mm.The 20
thick parts of the wall panels are 40 thickness.
(2) The laminating machine is easy to clean by lifting bridge
board. Intermittent water cycle cleaning system, easy to clean.
(3) Elastic front position, the backing paper does not lead, and
the backing paper can be adjusted before and after laminating.
(4) Suitable for over 350 grams of low card and paperboard,
paperboard and A/B/C/E/F and double corrugated board and corrugated
and corrugated
(5) Intelligent control of flattening, up to power saving and
control paper folding distance.
4. The Photo of Laminating Machine
