Melt Flow Rate Tester ,Melt Indexer
Application : This tester is used for mensurating melt flow rate when the
viscous flow state MFR value, it applies to the polycarbonate,
higher temperature of aromatic sulfone, fluorine plastic, nylon and
other engineering plastics, can also be applied to polyethylene
(PE),(PP), ABS resin, polyformaldehyde (POM), polycarbonate (PC)
resin with lower melting temperature, such as plastic test, widely
used in plastic production, plastic products, such as petroleum and
chemical industry and related colleges and universities, scientific
research units, and the commodity inspection department.
It applies to the GB/T3682-2000 thermoplastics melt mass flow rate
and melt volume flow rate measurement of national standards in the
regulation of thermoplastic plastics melt mass flow rate
measurement, equivalent to this standard adopted the ISO 1133:1997
of the regulation, and can meet the ASTM D1238 test standard.
This machine have desktop structure, reasonable design, stable and
reliable performance, good appearance, easy to operate, the high
performance, high precision control instrument has high precision
of sampling, control the characteristics of the faster, using the
fuzzy PID algorithm for temperature control.
Design Standards : ISO 1133,ASTM D1238,GB/T3682
Main parameters :
1. Extrude out part
Discharging mouth diameter: Φ 2.095 + / - 0.005 mm, discharging
mouth length: 8.000 + / - 0.025 mm
Charging tube diameter: Φ 9.550 + / - 0.025 mm, charging barrel
length: 152 + / - 0.1 mm
Piston rod head diameter: 9.475 + / - 0.015 mm, piston rod head
length: 6.350 + / - 0.100 mm
2. Standard test load (a total of 8 weights)
3. Temperature range: normal room temperature, 400 ℃
4. Constant temperature precision: plus or minus 0.5 ℃,
5. Display resolution: 0.1 ℃
6. Cutting method: it can be operated or cut automatically
7. Temperature recovery time: less than 4 minutes
8. Printing: automatic printing output of micro printer
9. Power supply voltage: AC220V + / - 10% 50HZ
Features:
1. Fast heating speed, minimum overshoot, high temperature accuracy
2. The test parameters can be calibrated and corrected conveniently
3. Manual and automatic cutting test method can be adopted
4. Equipped with a printer, the test results will be automatically
printed and output
Melt Flow Rate Test Machine Photos :
