Sign In | Join Free | My burrillandco.com
Home > Fiber Optic Equipment >

40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver

    Buy cheap 40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver from wholesalers
     
    Buy cheap 40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver from wholesalers
    • Buy cheap 40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver from wholesalers
    • Buy cheap 40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver from wholesalers

    40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver

    Ask Lasest Price
    Brand Name : YT
    Model Number : YT-FE2110A-25
    Certification : ISO, SGS, ROHS
    Price : Negotiation
    Payment Terms : XTransfer T/T, Western Union, PayPal
    Supply Ability : 5000 pcs/Month
    Delivery Time : 3-7days
    • Product Details
    • Company Profile

    40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver

    QSFP 40G SR4 Fiber Optic Module , Sfp Transceiver Multimode 100M MPO 850nm
    Description

    40G QSFP PSM LR4 is a parallel 40Gb/s Quad Small Form-factor Pluggable (QSFP+) optical module. Itprovides increased port density and total system cost savings. The QSFP+ full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gb/s operation for an aggregate data rate of 40Gb/s on 10km of single mode fiber.


    An optical fiber ribbon cable with an MTP/MPO connector can be plugged into the QSFP+ module receptacle. Proper alignment is ensured by the guide pins inside the receptacle. The cable usually cannot be twisted for proper channel to channel alignment. Electrical connection is achieved through a z-pluggable 38-pin connector per MSA requirement.


    Parameter

    Package (Form Factor)QSFP+
    Data Rate (typical)10.3 Gbps/CH
    Centre Wavelength850nm
    Distance100m on OM3 MMF
    DiagnosticsDigital Monitor
    Transmitter4CH VCSEL Array Laser
    Receiver4CH PIN photo detector Array
    TX Output Power (dBm)-7.5~+2.5
    RX Sensitivity (dBm)-9.5
    Low/High Case Temperature0°C~70°C
    Voltage Supply (typical)3.3v
    ConnectorMTP/MPO 8F MMF Without PI

    Features


    1. 4 channels full-duplex transceiver modules
    2. Transmission data rate up to 10.5Gbps per channel
    3. 4 channels 850nm VCSEL array
    4. 4 channels PIN photo detector array
    5. Low power consumption <1.5W
    6. Hot Pluggable QSFP form factor
    7. Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
    8. Single MPO connector receptacle
    9. Built-in digital diagnostic functions
    10. Operating case temperature 0°C to +70°C
    11. 3.3V power supply voltage
    12. RoHS 6 compliant(lead free)

    Specification
    ParameterSymbolMinTypicalMaxUnitNotes
    Transmitter
    Center WavelengthλC127013101350nm1
    RMS Spectral Widthλrms3.5nm1
    Average Launch Power, each lanePAVG-5.5-0.5+2.3dBm
    Optical Modulation Amplitude (OMA)POMA-4.5-0.5+3.5dBm1
    Difference in Launch Power between any two lanesPtx,diff5.0dB
    Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each LaneOMA-TDP-9.7dBm1
    Rise/Fall TimeTr/Tf50ps
    Extinction RatioER3.5dB
    Relative Intensity NoiseRin-128dB/Hz
    Optical Return Loss ToleranceTOL12dB
    Transmitter ReflectanceRT-12dB
    Transmitter Eye Mask MarginEMM10%2
    Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3}{0.25, 0.4, 0.45, 0.25, 0.28, 0.4}
    Average Launch Power OFF Transmitter, each LanePoff-30dBm
    Receiver
    Center WavelengthλC127013101350nm
    Damage ThresholdTHd+3dBm
    Overload, each laneOVL+1dBm
    Receiver Sensitivity in OMA, each LaneSEN-12.5dBm
    Difference in Receive Power between any two Lanes (OMA)Prx,diff5.0dB
    Signal Loss Assert ThresholdLOSA-30dBm
    Signal Loss Deassert ThresholdLOSD-15dBm
    LOS HysteresisLOSH0.56dB
    Optical Return LossORL-12dBm
    Receive Electrical 3 dB upper CutoffFrequency, each LaneFc12GHz

    Notes:

    1. Transmitter wavelength, RMS spectral width and power need to meet the OMA minus TDP specs to guarantee link performance.

    2. The eye diagram is tested with 1000 waveform.


    FAQ

    Q1. Can I have a sample order for this product?
    A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

    Q2. What about the lead time?
    A:Sample needs 3-6 days, mass production time needs 1-2 weeks for order quantity more than

    Q3. Do you have any MOQ limit for sample order?
    A: Low MOQ, 1pc for sample checking is available

    Q4. How do you ship the goods and how long does it take to arrive?
    A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping are also optional.

    Quality 40G SR4 MPO QSFP Multimode 100M 850nm Fiber Optic Transceiver for sale
    • Haven't found right suppliers
    • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
    • And this service is free of charge.
    • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
    Submit Buying Request
    Send your message to this supplier
    *From:
    Your email address is incorrect!
    *Subject:
    Your subject must be between 10-255 characters!
    *Message:
    For the best results, we recommend including the following details:
    • --Self introduction
    • --Required specifications
    • --Inquire about price/MOQ
    Your message must be between 20-3,000
    Yes! I would like your verified suppliers matching service!
    Send your message to this supplier
     
    *From:
    *To: Shenzhen Yutong Space Telecom Equipment Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Explore more Fiber Optic Transceiver products from this supplier
    Find Similar Products By Category:
    Inquiry Cart 0