RF ABSORBER FOR ANECHOIC CHAMBER EMC TEST HIGH QUALITY AND
COMPETITIVE PRICE
Foamed EPP particles are uniform in size and have stable
properties. The compression molding as following:
- Input: EPP particles are suctioned into stock bin by suction
system, and weighed for storage for use.
- Load pressure: Pre-pressing can improve the deformation caused by
transportation and increase the stability of products after
molding, too. The pre-pressing system conclude six steps, that is,
venting, weighing, suction, setting parameters, starting, and
discharging.
- Molding: Mould is designed according to the shape of absorber, here
the foam absorber is pyramid shape. Before molding, following steps
should to be done to get best molding condition: fixing mould,
adjusting mould, setting parameters, pre-heating, suction and
discharging. In molding process, it includes: closing moulds,
suction, steam heating, cooling and stabilization, demould.
- Drying: The surface of products taken out from mould has vapor and
the product inside contains residual water. So drying is needed to
ensure stable dimension.
- Post-process: Smooth the edges and corners, correct local
deformation.
- Quality testing: Measure the size, shape, and weight of products to
pick out inferior-quality products.
- Packing: Pack the products for safe.
RF Foam Absorber Types
· Rubber sheet micromave absorber
· Carbon-based foam microwave absorber
· Honeycomb & high power microwave absorber
· Sprayable microwave absorber
· Rigid and castable microwave absorber
| TYPE | BASE SIZE | NUMBER OF PYRAMIDAL | WEIGHT | TOTAL HEIGHT | BASE HEIGHT | PYRAMIDAL HEIGHT | PYRAMIDAL WIDTH |
| HZ-30 | 500*500 | 36*36 | 1.1 | 30 | 15 | 15 | 14 |
| HZ-50 | 500*500 | 20*20 | 1.8 | 50 | 20 | 30 | 25 |
| HZ-70 | 500*500 | 20*20 | 2.5 | 70 | 20 | 50 | 25 |
| HZ-100 | 500*500 | 13*13 | 3.3 | 100 | 25 | 75 | 38 |
| HZ-150 | 500*500 | 9*9 | 4.8 | 150 | 30 | 120 | 56 |
| HZ-200 | 500*500 | 7*7 | 6.3 | 200 | 40 | 160 | 71 |
| HZ-300 | 500*500 | 5*5 | 9 | 300 | 60 | 240 | 100 |
| HZ-400 | 500*500 | 4*4 | 12 | 400 | 70 | 330 | 125 |
| HZ-500 | 500*500 | 3*3 | 15 | 500 | 80 | 420 | 167 |
| HZ-600 | 400*400 | 2*2 | 18 | 600 | 90 | 510 | 200 |
| HZ-700 | 250*500 | 1*2 | 21 | 700 | 100 | 600 | 250 |
| HZ-800 | 250*500 | 1*2 | 24 | 800 | 100 | 700 | 250 |
| HZ-1000 | 334*334 | 1*1 | 30 | 1000 | 150 | 850 | 3 |
| TYPE | HEIGHT | REFLECTIVITY |
| 40 | 15 | 10 | 3 | 1.5 | 0.5 | 0.3 | 0.2 | 0.15 |
| HZ-100 | 100 | 50 | 45 | 40 | 30 | 20 | | | | |
| HZ-150 | 150 | 50 | 50 | 45 | 33 | 25 | | | | |
| HZ-200 | 200 | 50 | 50 | 50 | 37 | 30 | 17 | | | |
| HZ-300 | 300 | 50 | 50 | 50 | 40 | 33 | 20 | | | |
| HZ-400 | 400 | 50 | 50 | 50 | 45 | 40 | 25 | 17 | | |
| HZ-500 | 500 | 50 | 50 | 50 | 45 | 40 | 30 | 20 | 17 | |
| HZ-600 | 600 | 50 | 50 | 50 | 50 | 40 | 30 | 25 | 20 | |
| HZ-700 | 700 | 50 | 50 | 50 | 50 | 43 | 35 | 30 | 20 | 17 |
| HZ-800 | 800 | 50 | 50 | 50 | 50 | 45 | 36 | 30 | 20 | 17 |
| HZ-1000 | 1000 | 50 | 50 | 50 | 50 | 45 | 38 | 35 | 25 | 20
|
RF Foam Absorber Basic Information
· Base size: 500*500mm, customized acceptable
· Standard height: 30,50,100,150,200,300,400,500,700,800,1000mm
RF Foam Absorber Features
· The traditional material for anechoic chambers
· Outstanding absorbing over a wide frequency range
· Flexible
About US
- Our technical team has more than 10 years’ experience in designing
EMI filter. We know UL VDE CSA CE CQC etc safety standard very
well.
- Our technical service team learn many kinds of test standard such
as industrial application (IEC61800-3 for frequency inverter drive
EN12015 for elevator EN55011 for ISM device etc) and military
application (GJB151A GJB152A etc).We can solve EMI problem quickly
effectively and low-costly.
- Our test equipment: LCR digital bridge/voltage proof
tester/insulation resistance tester/spectrum analyzer/inductor
tester/standard signal source/shield room/interference intensity
tester etc
- Our product: EMI filter for general purpose/EMI filter for
frequency inverter/EMI filter for shielding facility/EMI filter for
military application
- Our advantage: high quality/high cost-effective/short lead time
- Our service: all products have two years guarantee
- Our main customers: frequency inverter drive and servo drive
system/MRI shielding system/solar inverter system/rail transit
system etc
