EMC Chamber RF Ferrite Tile Absorber Materials Electromagnetic

6.7mm 5.5mm height EMC chamber ferrite tile for testing

Ferrite tiles are precision machined to have almost zero dimensional tolerance which helps in proper alignment of tiles, reduce gap between tiles resulting better performance and Normalized site attenuation of EMC chambers per ANSI C63.4 and applications per CISPR 16-1-4 and IEC 61000-4-3

• Frequency range 30MHz to 1GHz
• Typical reflectivity as high as -38dB
• Impedance matched with DMC polyurethane and Polypropylene hybrid absorbers

Ferrite Tile Size

· Base size: 100*100mm

· Standard height: 5.2mm, 6.7mm

· Diameter of bore: 10mm

Ferrite Tile Application

· Used for EMC chamber

Based on the principle of having complex magnetic permeability equal (or nearly equal) to complex dielectric constant. Materials with this property exhibit an impedance equal to that of "free space" and therefore do not reflect radiated energy at normal incidence. Ferrite Tile can provide 10dB - 25dB of absorption between 30MHz and 1GHz. Tiles are thin (approximately 0.26 inches), but can be heavy (roughly 10 lbs per square foot).

Size for EMC chamber ferrite tile

· Base size: 100*100mm

· Standard height: 5.5mm, 6.7mm

· Diameter of bore: 10mm

Application for EMC chamber ferrite tile Used for EMC chamber

About US

• Our technical team has more than 10 years’ experience in designing EMI filter. We know UL VDE CSA CE CQC etc safety standard very well.
• Our technical service team learn many kinds of test standard such as industrial application (IEC61800-3 for frequency inverter drive EN12015 for elevator EN55011 for ISM device etc) and military application (GJB151A GJB152A etc).We can solve EMI problem quickly effectively and low-costly.
• Our test equipment: LCR digital bridge/voltage proof tester/insulation resistance tester/spectrum analyzer/inductor tester/standard signal source/shield room/interference intensity tester etc
• Our product: EMI filter for general purpose/EMI filter for frequency inverter/EMI filter for shielding facility/EMI filter for military application
• Our advantage: high quality/high cost-effective/short lead time
• Our service: all products have two years guarantee
• Our main customers: frequency inverter drive and servo drive system/MRI shielding system/solar inverter system/rail transit system etc