250VAC 25A feedthrough emi filter for anechoic chamber
When electronic devices have internal operating processes that rely
on signals in this RF frequency spectrum, unintended results may
occur if the ever-present RF or microwave electromagnetic radiation
interacts with the device. This occurrence is otherwise known as
electromagnetic interference (EMI).
EMI is a serious concern for devices that are externally powered
(ones that have a plug) or require signal wires that need to extend
outside the device (signal wires that might attach to sensors or
input/output devices). The wires that connect to power sources, or
I/O points, can act as antennas that will allow EMI to be received
(coupled onto them) and enter the device. Once inside the device,
EMI can then cause the device to perform improperly.
- Nominal voltage: 24 V ... 6 kV
- Nominal current: 50 mA ... 2000 A
- Nominal frequency: 50 Hz ... 20 kHz
- Test voltage: 100 V ... 12 kV
- Cut-off frequency: 1 kHz ... 40 GHz
- Attenuation: up to 130 dB
Feedthrough filters from us emc are used in very different areas
including electromobility, shielded rooms, mobile radio base
stations, medical technology, HF power supplies / switching power
supplies, MRI rooms (Magnetic Resonance Imaging), RF microwave
applications, HF generators, HF shielding technology, industrial
control systems, railway technology, high-frequency welding
equipment, elevator technology, tap-proof rooms, secure
communication in industrial networks, radar applications, aviation
400 Hz - 800 Hz - 1000 Hz, UPS power supplies, computer and server
rooms, radio communication equipment, interference suppression for
AC applications 110 VAC - 230 VAC - 400 VAC, interference
suppression for DC applications (e.g. battery systems), test
stations for DC applications, EMC laboratories
We offers one of the largest and most trusted selections of EMI
filtering components and assembly solutions for EMC compliance,
energy efficiency, and power management, addressing both conducted
and radiated EMI. We relies on proven experience to deliver
reliable products for even the most rugged environments. Nenglv
electromagnetic solutions are ideal for use in a variety of
defense, aerospace, industrial, energy, commercial, and medical
applications
Feedthrough filters are ideal for shielding applications and are
very easy to install. Maximum reliability and a long service life
are further features. Self-healing film capacitors provide good
temperature stability and are very resistant to voltage peaks and
failures in critical applications.
We Can Supply EMI Filter Like
100a EMI Filter
2 Stage EMI Filter
230v Ac EMI Filter
240v Ac EMI Filter
3 Phase 400hz EMI Filter
3 Phase RFI Filter
50a EMI Filter
AC Socket EMI Filter With Fuse And Switch
EMI Filter 5A
Ac Dc EMI Filter
Ac Input EMI Filter Design
Ac Line Filter For Audio
Ac Power Line Noise Filter
Anti-Interference Filter
Electromagnetic Interference Filters
EMC EMI Filter For PV Inverters
EMI Electrical Power Filter For Equipment
EMI Filter 10a
EMI Filter 230v
EMI Filter Ac
EMI Filter Feedthrough Capacitor
EMI Filter For Led Lights
EMI Filter For Power Supply
EMI Filter For Vfd
EMI Filter Manufacturers
EMI Filters For Mechanical Equipment
EMI RFI Ac Power Line Filters
EMI RFI Noise Filtration
EMI RFI Noise Suppression Protection Filters
Ethernet EMI Filter
Feedthru Capacitors
General Purpose Socket Emc RFI Noise Filter With Fuse
Gigabit Ethernet EMI Filter
Iec EMI Filters
Inline EMI Filter
Inverter EMI Filter
Laser Cutting Single Phase EMI Filter
Lc EMI Filter
Lcr Electronics EMI Filter
Led EMI Filter
Low Pass EMI Filter
Lvds EMI Filter
Mains EMI Filter
Military EMI Filters
Mri Rf Filter
Passive EMI Filter
Plc Noise Filter
Plug In EMI Filters
Power Filter With Fuse For Medical Equipment
Power Line Filters Single Phase
Power Supply EMI Filter
Radio Frequency Interference Filters
RF Feedthrough Capacitor
RFI Filter For Radio
RFI Filter For Tv
RFI Filter For Vfd
RFI Suppression Filter
Rj45 EMI Filter
Single Phase EMI Filter
Single Phase RFI Filter
Solar Inverter EMI Filter
Three Phase EMI Filters
Vfd EMI Filter
EMI Filter With Rocker Switch And Fuse
Two Stages EMI Ac Power RFI Filter ETC.
roduct Description
Ø Description:
n Feedthrough Capacitors offer a high insertion loss across a broad
band of frequencies from
a few tens of kHz up to the GHz region
n Very low internal series idductance
n Very high self-resonant frequency
n Self-healing dielectric
n High quality and reliability
n Anti-twist protection
n Through-buikhead mounting
n Custom-specific or dual-versions on request
electrical feedthrough Low Pass power line filter
ØTypical Applications:
n AC Power line filter for 250VAC power lines
n DC Power line filter for 48VDC battery power
n Increasing system and information security
n Power supplies
n Swiching and cellular equipment
n computer servers
n UPS power supplies
n Medical equipment
n Shielded rooms
Ø Specification:
| Product Name | electrical materials |
| Model | PE7000 |
| Rated voltage: | 250VAC |
| 80VDC~600VDC |
| Rated current: | 1A~250A |
| Operating frequency | 50/60Hz |
| Temperature range: | 40/085/56 |
| Filter | Rated Current(A) | Rated Voltage(V) | Leakage Current(mA) | Capacitance( μF) | Test Voltage1min(VDC) |
| 16-M4 | 16 | 250 | 4.14 | 2*0.022 | 2250 |
| 63-M6 | 63 | 250 | 88.5 | 2*0.47 | 2250 |
| 100-M8 | 100 | 250 | 564 | 2*3.0 | 2120 |
| 100-M8 | 100 | 250 | 564 | 2*3.0 | 2200 |
| 250-M12 | 250 | 250 | 157 | 2*1.0 | 2250 |
| 30-M5 | 30 | 600 | - | 2*0.018 | 2500 |
| 50-M6 | 50 | 200 | - | 0.22 | 720 |
| 65-M6 | 65 | 200 | - | 2*4.7 | 1000 |
| 62-M6 | 65 | 250 | - | 2*0.25 | 2250 |
