Double Cone Vacuum Dryer With Buffer and Condensates

Double Cone Vacuum Dryer With Buffer and Condensates

DCRD Series Double cone Rotating Vacuum Dryer is a new generation drying device developed by our factory on the basis of combining the technology of similar equipment. It has two connecting ways, belt connection and chain connection. Therefore, the dryer is stable in operation. The special design guarantees two shafts realize good concentricity. The heat medium and vacuum system all adapt reliable rotating connector with the technology from USA. On this basis, we also developed SZG-A. It can carry out steeples speed change and constant temperature control. As a specialized factory in drying industry, we supply hundred sets to the customers every year. As for working medium, it may be thermal oil or steam or hot water. For drying the adhesive raw material, we have designed specially a stirring plate buffer for you.

Working Principle

1) When the heat source (hot water, low pressure steam, or thermal oil) pass through the sealed jacket, the heat will be transmitted to raw material through the inner shell;
2) Under action of driving power, the tank is rotated slowly and the raw material is mixed continuously. The purpose of reinforced drying can be realized;
3) The raw material is under vacuum condition. When steam pressure is dropping, it makes the moisture (solvent) at the surface of raw material become saturation and then evaporates. The solvent will be discharged through vacuum pump.
4) The moisture (solvent) of raw material will infiltrate, evaporate and discharge continuously.
5) The production processes are carried out continuously and the drying can be done in a short time.

Product Application

DCRD double cone rotary vacuum dryer is applicable for drying and mixing powdery and granular materials in the pharmaceutical, food, chemical, dye and other industries. It is especially suitable for the following materials:
1. Thermosensitive materials that cannot withstand high temperature
2. Easily oxidized and dangerous materials
3. Materials whose solvent should be recovered and materials of poisonous gas
4. Materials required low residual volatile content
5. Materials with requirements on crystal shape

Technical Parameters

Model	100	350	500	750	1000	1500	2000	3500	4500	5000
Volume inside of tank(L)	100	350	500	750	1000	1500	2000	3500	4500	5000
Max loading capacity(L)	40	140	200	300	400	600	800	1400	1800	2000
Max loading weight(kg)	20	70	100	150	200	300	400	700	900	1000
Revolution(rpm)	3-13					6	5	4	4	4
Heating area(M2)	1.1	2.3	2.8	3.9	5.1	6.5	8.2	12.2	16.5	18.2
Motor power(kw)	0.75	1.1	1.5	2.2	3	4	5.5	7.5	11	15
Occupied area(mm)	2160*800	2160*800	2350*800	2560*1000	2860*1300	3060*1300	3260*1400	3760*1800	3960*2000	4400*2500
Rotating height(mm)	1750	2100	2250	2490	2800	2940	2990	3490	4100	4200
Design pressure of tank(Mpa)	-0.1~0.15
Desing pressure of jacket(Mpa)	<0.3
Weight(kg)	800	1100	1200	1500	2800	3300	3600	6400	7500	8600

Schmatic of Installation

Product Show

Contact Me

electrical, steam, natural gas or other

Jiangsu Guojin Drying Technology Co.,Ltd. specializes in the research and development and manufacture of drying, mixing, granulating, crushing, conveying, screening and other equipment. It has now become a large-scale enterprise in the drying equipment industry and a designated production enterprise of China Chemical Equipment Corporation. Especially, it has unique advantages in mesh belt type, hollow blade, disc type, rake type, fluidized bed, flash evaporation, airflow, spray, vacuum drying equipment, calcination, etc. Widely used in chemical, pharmaceutical, food, environmental protection, building materials, electronics, feed and other industries. Tens of thousands of users are spread all over the country and sold to more than then countries.

The company is located in Sanhekou Development Zone, Tianning District, Changzhou City, the birthplace of China's drying equipment industry. It is adjacent to Beijing-Shanghai Expressway, Shanghai-Nanjing Railway and Hengshan Crossing of Shanghai-Nanjing Expressway, 5km away from Shanghai in the east, Wuxi and Suzhou in the south, and the Yangtze River in the north.

The company has complete processing equipment. There are several sets of manufacturing equipment such as lifting, welding and cutting. It has excellent product development environment and production environment. The company has adopted advanced management methods and established a perfect quality assurance system.

Our company has established a set of perfect after-sales service system, which tracks and monitors all ex-factory products and the users are satisfied. "work with great care and keep improving" is the company's requirement for emplyees. Facing the increasingly standardized domestic and foreign markets, the company adheres to the corporate philosophy of "open competition, cooperative innovation, balance of interests and common development" and faces up to challenges with the belief of winning.