EC Type Fan Dry Cooler Bitcoin Server Immersion Cooling System
What's Immersion Cooling?
Also known as liquid submersion cooling. It is the practice of
submerging computer components (or full servers) in a thermally,
but not electrically, conductive liquid (dielectric coolant)
allowing higher heat transfer performance than air and many other
benefits.
Immersion cooling refers to the process of immersing servers, GPUs,
ASICs, and other IT hardware in a non-conductive fluid. The fluid
is a far more effective cooling medium than air is and so higher
efficiencies are achievable. Two-phase immersion cooling is similar
but the fluid boils on the hot components.
Why many large data centers have already moved or are considering
the move to immersion cooling?
1. Save floor space. Compare with traditional forced air cooling way(using precision
air conditioner), immersion cooling system will save much floor
space. Because no need rack system and no need air conditioner
indoor.
2. Save power. Compare with traditional forced air cooling way(using precision
air conditioner), immersion cooling system will save much power.
For example, no need to install many air conditioners indoor, then
no compressor power consumption. For example, the bitcoin miners no
need air cooling fans. Thesewill save power around 18~25%.
3. Increase hardware lifepan. In immersion, machines operate in a 100% controlled environment
with no dust, no temperature of humidity fluctuations, no
impurities. This will extend the service life of the mining machine
or server. This will also reduce machine maintainance fee.
4. Increase hashrate of the mining machine.
For immersion cooling system, our dry cooler is the most cost-effective way to remove heat and a necessary
component of the immersion cooling system, We designed a full range
of immersion optimized dry coolers. From 5kW single fan unit to the
V-shaped 48-921kW dry coolers. Made in China, sized to your needs.
Features of dry cooler
| High efficiency heat exchanger: capacity designs for maximizing the
heat transfer relative to the energy consumption of the fan. Tube
and tube coupling design for low pressure drop in the coil on the
media sides(maximum 100KPa at water designing condition). Our
thermodynamic and aerodynamic designing software is long year
tested and proved in Germany |
| Fan: only choose low specific energy consumption fans. Fan nozzle
designs for maximum air flow and air throw.Our fans from the
world`s leading manufacturer are practically proved to be reliable
in operation and long lasting. Motor: protection class IP 54 and
insulation class F. Air separator for each fan. |
| We facilitate you to have a long lasting and low maintainance
operation. Durable material and rigid enclosure with hard gloss
powder coated finish. Protective enclosure for both manifolds and
U-bends. Unit design for outdoor installation. 100% leakage tested
at 31bar. |
Options
| Coil design refrigerant: water, oil, glycol. | Multiple circuits. |
| Sub-cooling circuits. | Stainless steel or aluminum casing. |
| Coated aluminum or copper fins. | Explosion proof motor. |
| Customized fin spacing. | |
Technical parameter
Dry cooler D1 series parameter (fin space 2.1mm)
| Type | D1-005- 1x350 | D1-006- 1x350 | D1-007- 1x350 | D1-009- 1x450 | D1-011- 1x450 | D1-013- 1x450 | D1-014- 1x500 | D1-017- 1x500 | D1-020- 1x500 |
| Capacity | Water | 35℃ outdoor temp. | Inlet | 45℃ | △ | KW | 4.89 | 5.9 | 6.83 | 9.39 | 10.99 | 13.33 | 14.32 | 17.01 | 19.8 |
| outlet | 40℃ | Y |
| 20% Glycol | Inlet | 45℃ | △ | 4.72 | 5.69 | 6.69 | 8.9 | 10.61 | 13.05 | 13.91 | 16.11 | 19.29 |
| outlet | 40℃ | Y |
| Medium | Water flow | M3/h | 0.85 | 1.03 | 1.2 | 1.63 | 1.91 | 2.3 | 2.5 | 3 | 3.5 |
| Pressure drop | kPa | 36 | 31 | 58 | 25 | 40 | 80 | 50 | 60 | 40 |
| Air flow | △ | M3/h | 2828 | 2712 | 2492 | 6199 | 5827 | 5225 | 8469 | 8168 | 7601 |
| Y |
| Fan motor | Phase | 1 | 1 | 1 | 3 | 3 | 3 | 3 | 3 | 3 |
| △ | W | 140 | 140 | 140 | 540 | 540 | 540 | 830 | 830 | 830 |
| Y |
| △ | A | 0.6 | 0.6 | 0.6 | 1.1 | 1.1 | 1.1 | 1.45 | 1.45 | 1.45 |
| Y |
| Fan | No X φ | 1x1x350 | 1x1x350 | 1x1x350 | 1x1x450 | 1x1x450 | 1x1x450 | 1x1x500 | 1x1x500 | 1x1x500 |
| Sound pressure level | △ | dB(A) | 31 | 31 | 31 | 43 | 43 | 43 | 49 | 49 | 49 |
| Y | 10m |
| Dimension | L | mm | 870 | 870 | 870 | 1020 | 1020 | 1020 | 1220 | 1220 | 1220 |
| W | mm | 525 | 525 | 525 | 625 | 625 | 625 | 825 | 825 | 825 |
| H | mm | 797 | 797 | 797 | 820 | 820 | 820 | 870 | 870 | 870 |
| A | mm | 690 | 690 | 690 | 840 | 840 | 840 | 1040 | 1040 | 1040 |
| B | mm | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| C | mm | -- | -- | -- | -- | -- | -- | -- | -- | -- |
| D | mm | 490 | 490 | 490 | 490 | 490 | 490 | 490 | 490 | 490 |
| Inlet φ | mm | 3/4” | 3/4” | 3/4” | 1” | 1” | 1” | 1-1/4” | 1-1/4” | 1-1/4” |
| Inlet φ | mm | 3/4” | 3/4” | 3/4” | 1” | 1” | 1” | 1-1/4” | 1-1/4” | 1-1/4” |
| Product weight(empty) | kg | 38 | 42 | 48 | 55 | 60 | 67 | 75 | 82 | 91 |
Note: Standard SHSL-D1 dry cooler is vertical air discharge, for
horizontal air discharge please add “H” in nomenclature, for
excmple:SHSL-D1-005H-1X350
Some Reference:
For data center cooling or server liquid cooling:
Country: Mongolia Application: match with precision air conditioner Cooling capacity: 17.6kW Cooling medium: 34% ethylene glycol Supply power: 400V/3P/50Hz Fan brand: Ziehl-Abegg | Country: Russia Application:data center cooling Cooling capacity: 763kW Cooling medium: water Supply power: 380V/3P/50Hz Fan brand: Ziehl-Abegg |
 
| 
|
