Building material shops wood treatment impregnation autoclave

Ⅰ Product description

Building material shops wood treatment impregnation autoclave

is the key equipment of wood anticorrosion and coloring. Through the pharmaceutical infusion, pressure infiltration, vacuum drying and other processes, the wood in the storage tank can not only effectively prevent the mildew corrosion caused by wood rot bacteria, but also effectively prevent the damage of termites, wood borers and other insects to the wood. At the same time, adding different agentia can have the effect of flame retardant and coloring, greatly improving the service life and use effect of wood. Anticorrosive and flame retardant wood is widely used in indoor furniture, wood, antique garden construction, railways, mines, dock protection wood, pile of timber construction and other occasions.



Ⅱ Main Model

Note: The diameter and length can be customized according to users' needs. If the above model is not suitable, please tell us the diameter and length you need. We can customize it for you.


Ⅲ Technical parameters

Ⅳ

Building material shops wood treatment impregnation autoclave

Working Principle:

A. Inicial vacuum:suck air out of tank and wood with vacuum pump and keep the vacuum status 15minute to 1 hour according to treatment aims. Vacuum status is good for agent liquid goes into wood.The vacuum degree can be 0.098MPa.
B .Agent liquid adding: under condition of vacuum pump agent liquid into tank.
C .Pressurizing:When tank is full of agent liquid, pressurize tank with pressure pump.The pressure inside tank will rise slowly to rated pressure.Then keep the tank under rated pressure until wood have absorbed enough agent liquid.
D. Pressure discharging:When wood have absorbed enough agent liquid,discharge inside pressure and agent liquid that have not been absorbed.
E. final vacuum:when the rest agent liquid has been discharged,suck air out of tank and wood with vacuum pump again to make redundant agent liquid exude from wood cells or surface to avoid liquid drops.

Since 2008， Luy Machinery Equipment CO., LTD have more than 10 years experience in pressure vessel, the company covers an area of 5300m2 and has more than 200 employees. It is a modern new-type equipment manufacturing enterprise integrating design, manufacture and sales.

Our main products are wood impregnation equipment, cerosote wood treatment plant, wood heat treatment plant, rubber curing autoclave, composite autoclave, wood drying machine and ect. All equipments can be customized according to the customer's product process requirements, to the maximum satisfaction of different products technical and process requirements for the product.

We have exported to many countries, like Philippines, Uganda, Zambia, Kenya, Switzerland,Thailand, South Korea, Tanzania, Myanmar, Russia, Indonesia and ect.