250y 1400mm Diameter 200mm Height 316L metal plate structured
packing
1. 250Y metal plate structured packing
250Y structured packing is a kind of general structured packing,
and most of the structured packing used in industry belongs to this
kind. Corrugated packing is a disk-shaped packing composed of many
corrugated thin plates. There are two inclination angles of 30 °
and 45 ° between the corrugated plate and the tower shaft. During
assembly, the adjacent two corrugated plates are overlapped
reversely. Each tray of packing is vertically installed in the
tower, and the adjacent two trays of packing are staggered by 90
degrees.
2. 250Y metal plate structured packing inspection items
Each batch of structured packing shall be inspected by the quality
inspection department according to the contract before leaving the
factory.
The appearance of packing plate shall be flat and free of rust.
The peak height, wave distance, inclination and tooth angle of the
packing shall meet the corresponding standards.
The diameter, Ovality and levelness of packing disc shall meet
corresponding requirements.
For the hole diameter d0, hole center distance t and fine grain on the plate, only visual
inspection shall be conducted, and the hole shall be free of burr,
and the holes and fine grain shall be evenly distributed.
3. 250Y metal plate structured packing specifications
| Item | Unit | 125X | 125Y | 250X | 250Y | 350X | 350Y | 500X | 500Y |
| corrugation height h | mm | 24.0 | 11.5 | 8.4 | 6.0 |
| corrugation inclination θ | (°) | 30 | 45 | 30 | 45 | 30 | 45 | 30 | 45 |
| corrugation distance 2B | mm | 39.6 | 19.0 | 14.0 | 9.9 |
| corrugation angle β | (°) | 79.0 | 79.1 | 79.6 | 79.0 |
| void fraction ε | δ=0.15mm | % | 99.4 | 98.6 | 98.0 | 97.2 |
| δ=0.12mm | % | 99.5 | 98.9 | 98.4 | 97.8 |
| δ=0.10mm | % | 99.6 | 99.1 | 98.7 | 98.2 |
| Perforated hole diameter d0 | mm | 4.5 | 4.5 | 4.0 | 4.0 |
| Opening rate σ | % | 8.5-9.5 | 8.5-9.5 | 9.0-10.0 | 9.0-10.0 |
| radius of curvature of the top circle of corrugation angle R | mm | ≤2.0 | ≤1.4 | ≤0.9 | ≤0.5 |
Note: The influence of opening rate on the plate is not calculated
4. 250Y metal plate structured packing in high vacuum distillation
column.
Distillation is a method to separate liquid mixture with high
purity by using reflux. It is a widely used liquid mixture
separation operation in industry, and is widely used in petroleum,
chemical, light industry, food, metallurgy and other departments.
Distillation operation is classified according to different
methods. According to the operation mode, it can be divided into
continuous distillation and batch distillation; according to the
composition of the mixture, it can be divided into binary
distillation and multi-component distillation; according to whether
the additives affecting the vapor-liquid equilibrium are added to
the mixture, it can be divided into ordinary distillation and
special distillation (including extractive distillation, azeotropic
distillation and salt-adding distillation); if the distillation
process is accompanied by distillation, it can be divided into two
types Chemical reaction is called reactive distillation
In the operation of packed tower, the liquid drops from top to
bottom along the structured packing surface, and the rising vapor
contacts with each other. Therefore, the packing surface is the
place for mass exchange and heat exchange.
every year we manufacture and supply hundreds of cubic meters of
metal structured packing in different models. There are many
popular types and materials for option. Custom order is welcome,
too! We are happy to help with what you need!
