SSAB Audited With Cutting Process Services 400 plate For wear
resistant and mining applciation
400 plate For wear resistant steel plate overviews
plate , Also called AR, AR450, AR500, or armor plate, ® is SSAB’s
flagship material, the industry standard for wear-resistant
plating, and we are proud to be a certified supplier of this
stellar alloy. we have worked with the Sweden-based firm SSAB.
Because of our consistent commitment to excellence, we have proudly
operated as a major stockholder and processor of products right now
.
Except our extensive stock on site . we also provide Products
value-added services , which include Cutting <Laser cutting ,
Plasma cutting , Thermal cutting , Water jet cutting etc >,
Bending service Welding service and Machining services .
450 Sheet / plate / Technical Datasheet , Dimension Range
Mechanical Properties
| Grade | Thickness
(mm) | Hardness 1)
(HBW) | Tesnile strength
Rm
(MPa),
guaranteed | Typical yield
strength
(MPa) |
|---|
| 450 CR sheet | 0.7 - 2.10 | 425 - 4752) | 1370 - 1600 | 1250 |
| 450 sheet | 2.0 - 8.0 | 425 - 475 | - | 1250 |
| 450 plate | 3.2 - 80.0 | 425 - 475 | - | 1250 |
| 450 plate | 80.1 - 103.0 | 410 . 475 | - | 1250 |
| 450 plate | 103.1 - 130.0 | 390 . 475 | - | 1250 |
® wear plate is through-hardened. Minimum core hardness is 90 % of
the guaranteed minimum surface hardness.
Chemical Composition Of 450 Plates
| C *) | Si *) | Mn *) | P | S | Cr *) | Ni *) | Mo *) | B *) |
| Max % | Max % | Max % | Max % | Max % | Max % | Max % | Max % | Max % |
| 0.26 | 0.7 | 1.6 | 0.025 | 0.01 | 1.40 | 1.50 | 0.6 | 0.005 |
The steel is grain refined. *) Intentional alloying elements.
450 Maximum Carbon equivalent CET (CEV)
| Thickness mm | -5 | 5 - (10) | 10 - (20) | 20 - (40) | 40 - 80 | (80) - 130 |
| CET (CEV) Max | 0.37 (0.48) | 0.38 (0.49) | 0.39 (0.52) | 0.41 (0.60) | 0.43 (0.74) | 0.41 (0.67) |
| CET (CEV) Typical | 0.29 (0.39) | 0.33 (0.45) | 0.36 (0.48) | 0.38(0.56) | 0.38 (0.61) | 0.39 (0.64) |
The most popular abrasion-resistant steel with excellent structural
properties.
Longer wear life — and longer uptime.
The additional 50 Brinell hardness gained by upgrading to 450 will
increase the wear life. Case studies show that it is possible to
achieve up to 50% greater wear life, and even more for some
applications.
Dimension Range
| Name | Thickness | Width |
| 450 Sheet | 3.2~8mm | 600~1500mm |
| 450 plate | 4~130 mm | 600~3350mm |
| 450 Bar | | |
other specification and Dimension is available upon request
400 plate Value -added processing services
With Our wide range of Value-added processing services , can be
welded, bent,
cut and machined usingrun-of-the-mill techniques and tools. You get
the superior performance
of without having to invest in special equipment and training.
Preheating
The right preheat and interpass temperature for each welding
situation will optimize the result.
Welding
Any conventional welding method can be used for welding these
steels to any type of weldable steel.
Download ® Welding instruction
Cutting
wear plate can very well be cut using both cold and thermal cutting
methods.
Download ® Cutting instruction
Bending
is eminently well suited for cold bending.
Download ® Bending instruction
Machining
can be machined with high speed steel or cemented carbide tools.
Why Choose Us
Xzh steel is one of the major suppliers , wholesaler , stockholder
of products. Our skilled work force has many years’ experience of
working with this material. Beside our inventory ,We have location
just beside two major SSAB warehouse which
gurantee our quick delivery time .
We can offer customers a fast turnaround due to our extensive stock
in all grades and thicknesses. We can offer expert advice to
discuss your wearplate requirements and help in the design
optimisation stage of the project.Due to our extensive
manufacturing capabilities we can processor up to 700HB, press
parts up to 14.6m in length and waterjet cut to avoid a Heat Affected Zone (HAZ). Withour whole supply
chain integration , As we provide wide range of cut to size service
, we take
advantage of all material and extend our supply chain to Wear parts
.
450 Product Application
Recycling Components for Tough Demands
Recycling processes like the fragmentizing of waste places enormous
demands on equipment. And if the materials involved, wear too
quickly it can also mean enormous costs. To stay productive and
competitive it is vital to use materials that stand up to the
abuse. wear plate is the solution.
GARBAGE TRUCKS
400 or 450. With the increased hardness of , lighter trucks with
higher payloads can be produced. For packer blades inside garbage
trucks, 450 or 500 is used.
LINER PLATES
500, 550 or 600. can be used to line the walls of the sorting
pockets.
GRAPPLES
450 or 500. can significantly increase the life of the grapple and
other gripping equipment.
SHREDDERS
500, 550 or 600. can also be used in shredders. The specific steel
grade depends on the sorted material and the frequency of tough,
hard-crushed objects in the machine. The high toughness of steels
provides shredders with a substantially higher resistance against
cracking and cleavages.
GRANULATOR KNIVES
600 or Extreme. Granulator knives are used for the fragmentation of
waste especially plastic, tires, cables and rubber waste. The high
toughness of steels provides substantially higher resistance
against chipping.
PRISMATIC KNIVES
Extreme or 600. For the fragmentation of waste, especially
plastics, tires, cables and rubber waste, can be used. The high
toughness of steels provides substantially higher resistance
against chipping.
HAMMER MILLS
500, 550 or 600. Hammers are used for the fragmentation of waste
and minerals. The high toughness of steels provides substantially
higher resistance against cracking.
SIEVES/SCREEN
500 or 450. Roll-bended sieves are most commonly used in recycling
as both a sorting and fragmenting facility at the same time. The
high toughness of steels provides a substantially higher resistance
against cracking.
CONVEYOR BELT
450 or 500. plates can be used to line conveyor belts and be used
in moving chains.
CONTAINERS
400 or 450. For use in the sides and floor of containers, wear
plate combines toughness with high hardness, meaning more
resistance to impacts and dents, and a higher wear resistance.
450 Product Display Package , Delivery
FAQ
Q: Would you provide samples For free?
A: Yes . with on stock specification We provide samples For Free .
Freight charge collect
Q: What information should i provide to source for the right
products ?
A: Material grade, width, thickness, coating and Purchase quantity
, Expected lead time ,etc
Q: What are the shipping ports?
A: Under normal circumstances, we ship from Shanghai, Tianjin,
Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the
price of raw materials.
Q: How long does your delivery time take?
A: In general, our delivery time is within 5-45 days, and may be
delayed if the demand is extremely
large or special circumstances occur.
Q: Can I visit your location?
A: Of course, we welcome customers from all over the world to visit
our factory. However, some
of the plants are not open to the public.
Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality
before packaging, and unqualified
products will be destroyed.
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer with iron
packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion
during ocean transportation.
Q: What is your working time?
A: In general, our online service time is Beijing time: 8:00-22:00,
after 22:00,
we will reply to your inquiry during the next working day.
plate 400 synonyms
armor plate , 400 Bhn Sheets, Ar 400 Plates, Bis 400 Wear , 400 Hbw
Abrasion Resistant Stee Plates, 400 Bhn Abrasion , Ar 400 Sheets,
Hb 400 Bhn Plate, Abrex 400 Pressure Vessels Plate, Low-temperature
Steel Plates, BHN 400 Wear , BHN 400 Wear Plates, BHN 400 Liner
Plates, BHN 400 Abrasion , Bis 400 Wear , Abrex 400 Heavy Section
Plate, Hb 400 Plate, Hb 400 Plate, BHN 400 Bhn Plate, Sumihard 400
Pressure Vessel Steel Plates, Xar 400 BHN Wear Plates, Creusabro
400 Steel Plates, amor 400 Pressure Vessel Steel Plates, Hb 400 Bhn
Plate, BHN 400 High Tensile Plate, BHN 400 Pressure Vessels Plate,
BHN 400 Abrasion , Boiler Steel 400 Bhn Plates, BHN 400 Container
Plate, A 400 - Hard Wearing Plate, BHN 400 abrasion resistant wear
plates, Material BHN 400 Wear , BHN 400 Abrasion , Ar 400 Clad
Plate, Dillidur 400 Wear Plate Material, BHN 400 Hb Clad Steel
Plate, BHN 400 Brinel Plate, BHN 400 Wear Clad Steel Plate, BHN 400
wear resistant liner plates, Abrex 400 Low Temperature Plate, BHN
400 Coated Plate, BHN 400 Abrasion , BHN 400 Material Wear , Abrex
400 Wear Plate, BHN 400 Wear-resistant plates, BHN 400 Boiler
Plate, BHN 400 Steel Plate, EN 10051 BHN 400 Plate, BHN 400 Low
Temperature Plate, BHN HB, BHN 400 Heavy Section Plate, Abrex 400
Wear Plate, Abrex 600 Plate, BHN 400 Wear Clad Steel Plate, Abrex
400 Plate, BHN 960 Plate, BIS Plate 450 Plate, BIS Plate 320 Plate,
BHN 400 Steel Plate, 400 Hb Wear , BHN 700 Plate, 400 Hb Clad
Plate, AZO 400 Plate, BHN 1100 Plate, BHN 800, BHN 1300, BHN 900
Plate, DOX 500 Plate, BHN 400 Material Wear, DOX 450 Plate, Steel
BHN 400 Plate, BHN 650 Plate, Dillidur 400 Wear Plate Material, BIS
Plate, HB 400 / AB, Abrex 500 Plate, BHN 400 Wear and abrasion
resistant steel, Abrex 450 Plate.
