316ti UNS S31635 Annealed Stainless Steel Strip Coil / Slit Coil
For chimney liners overview
316Ti™ is a titanium stabilized Type 316 stainless. It is produced
to ASTM A240 and DIN/EN No. 1.4571. Titanium is added to minimize
corrosion over extended exposure to elevated temperatures ranging
from 900 to 1500 degrees °F (425 to 815 °C). The alloy resists
corrosion at higher temperatures because the addition of titanium
stabilizes the structure against chromium precipitation.
This alloy was developed to improve the performance of 316 and 316L
at elevated temperatures. It is commonly used is flexible ducts and
chimney liners.
316TI stainless steel Equivalent Materials
EN 1.4571
DIN X6CrNiMoTi17-12-2
UNS S31635
SS 2350
AISI 316Ti
316ti UNS S31635 Annealed Stainless Steel Strip Coil / Slit Coil
Specification and Dimension Ranges
316 Stainless Steel Specifications:
ASTM A240 for annealed condition
ASTM A666 for tempered material
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade:
Cold Rolled Strip Available Size
Width: 4.0~609.6 mm
Thickness: 0.1~3.0 mm
Surface Finish:
2B, 2D, BA, No.3, No.4, No.5, SB, HL, etc
| Surface finish | Characteristics and application |
| NO.2B | The surface brightness and flatness of no2B is better than no2D.
then through a special surface treatment to improve its mechanical properties,No2B could
nearly satisfy compreh ensive uses. |
| NO.1 | The surface is finished by heat treatment and pickling or processes
corresponding thereto after hot rolling. |
| NO.4 | Polished with abrasive belt of grit #150-#180,have better
brightness with discontinuous coarse stria,but thinner than No3, are used as bathtub buildings
inner and external ornaments electrical appliances kitchen utensils and food
processing equipment etc. |
| HL | Polished with abrasive belt of grit #150#320 on the NO.4 finish and
has continuous streaks,mainly used as buildingsornaments elevators,door of
building,frontal plate etc. |
| BA | Cold rolled, bright annealed and skin-passed, the product have
excellent brightness and good reflexivity like mirror,kitchen apparatus,ornament etc. |
| 8K | The product have excellent brightness and prefer reflexivity can to
be the mirror. |
Condition :
ANNEALED CONDITION
Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength
(0.2% Offset): 38 KSI min (260 MPA min) Elongation: 40%min
Hardness: B95 max
TEMPERED 1/16 HARD
Ultimate Tensile Strength: 95 KSI min (655 MPA min) Yield Strength
(0.2% Offset): 45 KSI min (310 MPA min) Elongation: 40% min
Tempered 1/8 Hard Ultimate Tensile Strength: 100 KSI min (690 MPA
min) Yield Strength (0.2% Offset): 55 KSI min (380 MPA min)
Elongation: 45% min
TEMPERED 1/4 HARD
Ultimate Tensile Strength: 125 KSI min (860 MPA min) Yield Strength
(0.2% Offset): 75 KSI min (515 MPA min) Elongation: 25% min
TEMPERED 1/2 HARD
Ultimate Tensile Strength: 150 KSI min (1035 MPA min) Yield
Strength (0.2% Offset): 110 KSI min (760 MPA min) Elongation: 15%
< 0.15" 18% > 0.15"
TEMPERED 3/4 HARD
Ultimate Tensile Strength: 175 KSI min (1205 MPA min) Yield
Strength (0.2% Offset): 135 KSI min (930 MPA min) Elongation: 10%
< 0.15" 12% > 0.15"
TEMPERED FULL HARD
Ultimate Tensile Strength: 185 KSI min (1275 MPA min) Yield
Strength (0.2% Offset): 140 KSI min (965 MPA min) Elongation: 8%
< 0.15" 9% > 0.15"
Available Steel Grade:
Stainless steel : Type 201, 202, 205, 301, 302, 302B, 303, 303Se,
304, 304L, 302HQ, 304N, 305, 308, 309, 309S, 310, 310S, 314, 316,
316L, 316F, 316N, 317, 317L, 317LMN, 321, 330, 347, 348, 384, 405,
409, 429, 430, 430F, 430FSe, 434, 436, 442, 446, 403, 410, 414,
416, 416Se, 420, 420F, 422, 431, 440A, 440B, 440C, 630 , 13-8 PH
,15-5 PH , 17-7 PH ,17-4 ph , 904L , A286 ,VG-10 , SAE 316 , SAE
316L , SAE 440 , SAE 420
Duplex stainless steel : 2205 , 2304 , 2507
Nickel alloy :
Titanium and titanium alloys
316ti UNS S31635 Annealed Stainless Steel Strip Coil / Slit Coil
Application
Chemicals, Petrochemicals, Oil & Natural Gas Organization, Fats,
Fertilizers, Sugar Mills & Distilleries, Cement Industries, Ship
Builders, Paper Industries, Pumps, Automation, Paints, Steel
Industries, etc.
316ti UNS S31635 Annealed Stainless Steel Strip Coil / Slit Coil
For chimney liners Technical datasheet
TYPE 316 STAINLESS STEEL STRIP
Type 316, ASTMA-666 stainless steel strip are molydbenum bearing
stainless steels possessing a greatly increased resistance to
chemical attack as compared to that of the basic chromium-nickel
analysis. In addition, Type 316 also offers higher creep,
stress-to-rupture, and tensile strengths at elevated temperatures
than any other stainless steel. Gibbs stocks this material in
gauges from .010” -
.025” in the annealed and ¼ hard conditions.
| Chemical Composition | % | | Thickness Tolerances < 6” AMS2242 | Tolerance (inch) +/- |
| Carbon | 0.08 max | | over .050 - .062 incl | +/- .0030 |
| Manganese | 2.00 max | | over .035 - .050 incl | +/- .0025 |
| Silicon | 1.00 max | | over .029 - .035 incl | +/- .0020 |
| Phosphorus | 0.040 max | | over .020 - .029 incl | +/- .0020 |
| Sulfur | 0.030 max | | over .017 - .020 incl | +/- .0015 |
| Chromium | 16.00 – 18.00 | | over .013 - .017 incl | +/- .0015 |
| Nickel | 10.00 – 14.00 | | over .011 - .013 incl | +/- .0015 |
| Molybdenum | 2.00 – 3.00 | | over .010 - .011 incl | +/- .0015 |
| Copper | 0.75 max | | under .010 | +/- 10% |
Mechanical Properties |
| Condition | AMS Specification | Tensile Min PSI | Yield Min PSI | Elong % Min | Hardness (Reference Only) |
| Annealed | 5524 | 75,000 | 30,000 | 40 / 45* | RB 95 max |
| ¼ Hard | 5907 | 125,000 | 75,000 | 10 | RC 25 min |
| | | | | |
| * .025 thickness and over |
| Additional Information |
| Width Tolerance | +/- .003 | |
| Camber Tolerance | Up to and including 1.500” wide | .500” in 8 feet |
| Over 1.500” wide | .250” in 8 feet |
| | |
| Edges available | #3 Slit edge | |
| #5 Deburred edge | |
| #1 Round edge | |
316ti UNS S31635 Annealed Stainless Steel Strip Coil / Slit Coil
Products display and Package Details
General Q and A Questions
Q: Would you provide samples For free?
A: Yes. with on stock specification We provide samples For Free.
Freight charge collect
Q: What information should i provide to source for the right
products?
A: Material grade, width, thickness, coating and Purchase quantity,
Expected lead time, etc
Q: What are the shipping ports?
A: Under normal circumstances, we ship from Shanghai, Tianjin,
Qingdao, Ningbo ports, you
can choose other ports according to your needs.
Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the
price of raw materials.
Q: How long does your delivery time take?
A: In general, our delivery time is within 5-45 days, and may be
delayed if the demand is extremely
large or special circumstances occur.
Q: Can I visit your location?
A: Of course, we welcome customers from all over the world to visit
our factory. However, some
of the plants are not open to the public.
Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality
before packaging, and unqualified products will be destroyed. We
provide All Original Mill test certificate and support third party
inspection.
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer with iron
packaging and is fixed with a fumigation
wooden pallet. It can effectively protect products from corrosion
during ocean transportation.
Q: What is your working time?
A: In general, our online service time is Beijing time: 8:00-22:00,
after 22:00,
we will reply to your inquiry during the next working day.
