316SS 56Bar 2'' BSP End Y-Type Angle Seated Spring Check Valve
Quick Details
What is a Check Valve?
The valve that used to prevent backflow in a piping system is known
as a check valve. It is also known as
a non-return valve or NRV. The pressure of the fluid passing
through a pipeline opens the valve, while any
reversal of flow will close the valve.
It allows full unobstructed flow and automatically shuts as
pressure decreases. The exact operation will vary
depending on the mechanism of the valve.
Product Name | Y-Type Spring Check Valve |
Material | stainless steel |
Color | nickel white |
Standard | DIN GB JIS ANSI |
Class | 150LB(16)~600LB(2500) |
Body and Ball Material | CF8 CF3 CF8M CF3M WCB PVC UPVC PP |
Thread | -29~150(PTFE), -29~200( PTFE+GLASS), -29~300(J2 PPL) |
Steam Seat and Gasket | PTFE |
Y-type spring check valve, full port, 316SS, PTFE seat, 304SS
spring, BSP ends. Rated to 800 psi (56 bar)
Size- 1/4″ (DN8) – 2″ (DN50)
* Options: NPT end connections.
Stainless Steel Check Valve Standards
Face to face dimensions as ANSI B16.10
End flange dimension as ANSI B16.5
Pressure-temperature ratings as ANSI B16.34
Pressure test as API 598
Applicable Medium: water ,gas,oil,and other causticity medium.
Stainless Steel Check Valve Application:
Valve is used for preventing the back-going of medium in pipelines
and equipments, and the pressure of
medium will bring the result of opening and closing automatically.
When the medium is back-going, valve disc will automaticaly closed to
avoid accidents.
Stainless Steel Check Valve Test Pressure
Test Item | Shell Test | Seal Test | Back Seal Test | Air Seal Test |
Medium | Water | Air |
Unit | MPa | lbf/in2 | MPa | lbf/in2 | MPa | lbf/in2 | MPa | lbf/in2 |
Pressure (Class) | 150 | 3.1 | 450 | 2.2 | 315 | 2.2 | 315 | 0.5-0.7 | 60-100 |
300 | 7.8 | 1125 | 5.6 | 815 | 5.6 | 815 |
400 | 10.3 | 1500 | 7.6 | 1100 | 7.6 | 1100 |
600 | 15.3 | 2225 | 11.2 | 1630 | 11.2 | 1630 |
900 | 23.1 | 3350 | 16.8 | 2440 | 16.8 | 2440 |
1500 | 38.4 | 5575 | 28.1 | 4080 | 28.1 | 4080 |
Types of Valves
The type of disk will decide the type of valve. Most common types
of Check valves are
Swing Type.
Lift Type
Dual Plate Type
Stop Check Valve
The disc in a swing type valve is unguided as it fully opens or
closes. This Valve operates when there is flow
in the line and get fully closed when there is no flow. Turbulence
and pressure drop in the valve is very low.
Disk and seat designs can be of metal to metal or metal to
composite.
The angle between the seat and the vertical plane is known as the
seating angle and varies from 0 to 45 degrees.
Usually, the seat angles are in the range of 5 to 7 degrees. Larger
seat angles reduce the disc travel, resulting in
quick closing, thus minimizing the possibility of water hammer. A
vertical seat has a 0-degree angle.
The swing type valve allows full, unobstructed flow and
automatically closes as pressure decreases. Usually installed
in combination with gate valves because they provide relatively
free flow combinations.
A basic swing type valve consists of a valve body, a bonnet, and a
disk that is connected to a hinge.
Packing Details:
We choose suitable wood cases according to different valves and
arrange skilled workers to pack in case of bruise. Long term
cooperated forwarder will book space, clear customs and transport
for us without delay. There are three ways for transportation, by
sea, by air and by train. We will arrange transportation according
to customers' needs.
Delivery Details: According to the order, 7~60days
