Floor Mounted Electrical Telescopic Bleacher Seating With Arm
Feature of Telescopic Bleacher Seating : Most of the telescopic tribune seating are placed in the
conference hall, auditorium hall and stadium, gym, or some pubilc
sport center. It can be closed and opened by electric control.
Telescopic Bleacher Structure: cold-rolled steel rear cross
beam,front cross beam and brace beam dealt with powder coating.
Q235 Steel plate framework is One-batch forming.
Description of motor and power system of Telescopic Bleacher Seating:
(1) During operation, it can cooperate with a movable control
switch to perform forward and backward.
(2) Imported deceleration motor is used to drive gear transmission,
and the special wide PU friction wheel is used to rub against the
floor to promote the movement of the stands. All motors in each
part realize the expansion and contraction of independent modules,
and special codes are equipped to ensure parallel between modules.
Each code is controlled by a computer system.
(3) The driving system can ensure that when encountering ground
defects and obstacles, it provides sufficient power and does not
run off the track.
Drive mechanism: Electric control type, with infrared remote control and limited
manual control. It adopts imported three-phase geared motor with
electric power of 0.55KW and voltage of 380V. It has the
characteristics of large reduction ratio, high efficiency, low
noise, few failures and long life. The anti-deflection device is
installed to ensure that the movable stand can be easily extended
and contracted without deviation. The telescopic mechanism is
flexible, has low working noise and does not scratch the floor.
It can be matched with a variety of styles of seats: low back, high
back folding plastic seats, folding soft-pack seats, seats with
armrests, etc., styles are optional. The plastic seat material is:
high-density polyethylene (HDPE), the soft seat material: fireproof
fiber + ergonomic memory foam.
In addition to the weight of the seat itself, the stand should also
meet the following loads: dynamic load per square meter of 450kg;
per meter length can withstand a swing load of 36kg;
Fixed railings are used on both sides of the stands, which are made
of steel material (matt), and there is no need to plug and unplug
when the stands are stowed. The guardrail design meets the
following horizontal forces: the top end meets the requirements of
65kg per meter, the middle of the guardrail meets the requirements
of 135kg per meter, and the lateral force 50Kg/m does not loosen or
deform.
The Telescopic Bleacher Seating can withstand a rated load of 140
kg per seat.
| Specifications |
| Product | Telescopic Bleacher Seating |
| Material | Chair: Cold molded foam chair |
| Structure Frame: Cold roll steel dealt with powder coating,grey
color |
| Flooring: 18mm plywood with anti-slip finish or covered by carpet,
Or alumium floor |
| Safety Railing: Steel with powder coating or Stainless steel is
optional |
| Chair Type | Foldable Arm chair |
| Installation Type | Floor mounted type |
| Bleacher Type | Manual/Semi-Motorized/Ful-motorized |
| Operation | Wire control or remote control (Moterized type) |
| Color of Steel Structure | Black or Grey |
| Railings | Safety Railing on two sides of the bleacher, backside railing is
optional |
| Step Height | 260mm,280mm,300mm |
| Step Width | 700-900mm |
| Stair Step Width | 800-1000mm |
| Packing | PP woven bag, Carton, Air bubble film |
| MOQ | 100 seats per set |
| Delivery Time | 25-30 days according to the quantity |
| Application | Stadium, Conference Hall, Theatre, School, Exhibition Center,etc. |
