Non-Combustible Coated Wire Wound Resistor Power Supply
OC_212-datasheet.pdf
REQUIRENTS IN USE
1,IN THE HIGH HUMIDITY SITUATION, IT WILL MAKE THE SOLDER ABILITY
WORST. PLEASE PRESERVE THE RESISTORS IN 40°C ,70 RH BELOW
2,PLEASE DON`T OPEN THE MINE PACKAGE WHEN YOU PRESERVE IT
3,WHEN IN THE HIGH TEMPERATURE SITUATION, PLEASE ACCORD TO THE
PICTURE OF “POWER DERATING CURVE” REDUCE THE USE OF POWER RATING
4,YOU SHOULD AVOID THE CONNECTOR OF RESISATNCE REPLACED BY LATGE
VOLTAGE AND POWER
5,AS THE PAINT IS NOT SUBJECT TO EXTERNAL SHOCKS INCOMBUSTIBILITY
LESS,
IT SHOULD BE DISPOSED OF IN A VARIETY OF REDUCING THE BODY'S
RESISTANCE COLLISION
Mechanical Performance
The terminal shall withstand 4 bends of 90°rotation without any
breakage or damage, when the Resistor is fixed in vertical
position.
Fixing the resistor body, a static load of 2.5Kg is to be gradually
applied into the terminal for 10seconds without causing any
looseness and fall.
To bend the lead wire at the point of about 6mm from resistor body
to 90°,then catch the wire at 1.2±0.4mm apart from the bend point
end and turn it (clockwise) by 360 degrees Perpendicular to the
resistor axis at speed of sane 5 seconds per turn, and do the same
Counterclockwise again which constitute a whole turn. Repeat the
turn for 2 times without Causing any break and looseness.
Description
Thermal fuses, defined as non-resettable, are single action devices
that are widely used for the electrical equipments against over
temperature. The thermal cutoffs are composed of the fusible alloy
with low melting point and special resin, encapsulated in a plastic
or ceramic housing. Under normal operated, the fusible alloy is
joined by the two lead wires within the housing. When the thermal
cutoff senses an abnormal heat and reach a preset temperature, the
fusible alloy melts and disconnects the circuit completely with the
aid of the special resin. Both Axial and Radial shapes are
available, with rated current from 1A to 200A, Function temperature
76℃~221℃, certificated including UL, cUL, VDE,TUV,PSE, KTL, CCC and
RoHS, REACH Compliant.
1. Factory supply directly
2. Completed certificates such as UL,VDE,SGS,etc and high quality
available
3. Quick delivery
4. Improve after sales service system
