AMISCO DIN43650 Form A EVI 3P/16 Hydraulic Valve Electrical Coil
This Amisco Type EVI 3P/16 coil is widely used in hydraulic check
valves. Check valves are used in hydraulic systems to prevent
reverse flow of oil flow or in pneumatic systems to prevent reverse
flow of compressed air. The pilot operated check valve is also
called a lock valve or a pressure maintaining valve. It is the same
as the check valve to prevent reverse flow of oil. However, when
the oil flow needs to flow in the opposite direction in the
hydraulic circuit, the control oil pressure can be utilized to open
the check valve so that the oil flow can flow in both directions.
The pilot operated check valve uses a conical spool, so the sealing
performance is good. When a closed oil circuit is required, this
valve can be used as a one-way locking of the oil passage to
maintain the pressure. The hydraulic control check valve controls
the leakage of oil in the form of internal leakage and external
leakage. The internal venting type can be used in the oil passage
with no back pressure at the reverse flow of the oil flow;
otherwise, the external venting type is required to reduce the
control oil pressure.
Solenoid Working Principle
The solenoid simply works on the principle of “electromagnetism”.
When the current flow through the coil magnetic field is generated
in it, if you place a metal core inside the coil the magnetic lines
of flux is concentrated on the core which increases the induction
of the coil as compared to the air core.
Types of Solenoids
There are different types of solenoids available in the market, the
classification is made based on material, Design and function.
AC- Laminated Solenoid
DC- C Frame Solenoid
DC- D Frame Solenoid
Linear Solenoid
Rotary Solenoid
Technical data of AMISCO Type 3P/16 Hydraulic Solenoid Coils:
| Model No. | BB16050020 |
| Ref No. | EVI 3P/16 |
| Normal voltage | DC12V, DC24V (±10%) |
| Normal power | DC: 26W |
| Material | Plastic, Brass |
| Wire class | H, F |
| Connection | DIN43650A |
| Application | Hydraulic Cartridge Solenoid Check Valve |
| Hole size | 16 mm |
| Height | 37.5 mm |
| Width | 50 mm |
Overall dimension of Solenoid Coils:
Detail enlargement of EVI 3P/16 electromagnetic Valve Coils:
Brando offers a wide range of solenoid valve coils, which designed
into various types, mainly features encapsulated coils, including
thermoplastic and thermosetting. Our coils have the characteristics
of High Performance, High Reliability and Long Service Life, can be
used for Different Applications. We also provide excellent
Customized Service.
Solenoid Coil Main Features:
1. Heat resistant bobbin moulded with thermoplastic polyester
material;
2. High quality Enameled copper wire, F, H, N different insulation
class for choose;
3. Built-in magnetic yoke, made by low carbon iron;
4. Encapsulation with high quality specially designed thermosetting
& thermoplastic material.
Solenoid Coil Main Structure:
The conventional structure of a solenoid valve coil includes:
Framework, Enameled copper wire, PIN, Yoke and Encapsulation. In
addition, according to the actual use, there will be a magnetizing
guide ring, a rectifier bridge be used for rectifying, etc.
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
