Vertical 5.5kW Mining Dust Collector , Bag Filter Cartridge Machine
Introduction
The dust remover is a method to get rid of the filter medium by
blowing compressed air (bag or cartridge) attached to the dust;
according to the size of dust collector for machines may have
several groups of pulse valve, a pulse controller or PLC control,
every time a group of pulse valve to remove dust it controls part
of the bag or filter the cylinder, while the other bag or cartridge
work, for a long time after the next set of pulse valve open, clean
up the part of the dust remover is composed of a hopper, on the
box, in the box and a lower box part, and the box section
structure. When the dust laden gas into the hopper by the air inlet
duct, coarse dust particles directly into the bottom of the ash
bucket, fine dust particles with the air flow turning upward into
the middle and lower box, dust deposition on the surface of the
filter bag, the gas after filtered into the box on the net to set
gas pipe exhaust duct, the exhaust fan to exhaust the atmosphere.
The cleaning process is to cut off the air outlet duct of the room
first, so that the cloth bag in the room is in the state of no air
flow through the air. Then open the pulse valve with compressed air
pulse jet cleaning, shut-off valve closing time to ensure in the
blowing dust bag after stripped from the settlement to avoid the
dust in the hopper, and then with the air from the surface of the
filter bag attached to adjacent set bag surface phenomenon, make
the bag cleaning thoroughly, and the programmable program control
instrument on the valve and exhaust valve, pulse discharging valve
and automatic control of the whole. The dusty gas enters from the
air inlet, through the hopper, part of the large dust particles in
gas by inertial force and gravity separated directly into the
bottom of the ash bucket. Bag filter dust containing gas through an
area after entering in the box, the gas passes through the filter
bag dust is blocked in the outer surface of the bag, the gas after
purification filter bag into the box, then the air is discharged by
the air outlet
Principle overview
Dust-containing gas enters the dust collector through the air
inlet, and the direction of the air flow changes after passing
through the steering device. Large particles of dust fall into the
ash hopper due to inertia, and the dust-containing airflow that
changes direction continues to enter the filter room.
The dust is blocked and attached to the surface of the filter bag;
the clean gas is removed from the upper part through the air outlet
under the action of the induced draft fan.
Features
◎RFS series bag dust collector can be used with R-type Raymond
mill, which effectively solves the residual air dust removal and
the dust removal efficiency reaches 99%.
Range of use
It is widely used in dust collection systems in metallurgy,
machinery, chemical industry, electric power, building materials,
cement and other industries.
| Name | Vertical 5.5kW Mining Dust Collector, Bag Filter Cartridge Machine |
| Keyword | Mining Dust Collector |
| Model | Bag Filter Machine |
Technical parameter
| Handling air volume(m/h) | | 1120-5600 | 1800-9360 | 400-20000 |
| Resistance (mmH:O) | | 80-300 | 80-300 | 80-300 |
| Filter area(m2) | | 39 | 66 | 140 |
| Number of filer bags | | 24 | 40 | 72 |
| Dust removal eficiency(%) | | ＞99.5 | ＞99.5 | ＞99.5 |
| Ash bucket volume(mP) | | 1 | 1.5 | 2.6 |
| Dust cllector weigh(t) | | 2 | 2.5 | 4 |
| Model | | 4-72-11NO.4A | 4-72-11NO.4A | 4-72-1 INO.5A |
| Ventilator Power (kW) | | 5.5 | 7.5 | 15 |
| Speed(r/min) | | 2900 | 2900 | 2900 |
Company introduction
Tangshan Mine Machinery Factory is a specialized manufacturer that produces complete sets of
equipment for metallurgy, mining, building materials, environmental
protection, as well as the design and manufacture of complete sets
of sand and gravel materials, and the design and manufacture of dry
tailings discharge. The company was founded in 1971 and turned into
a joint-stock enterprise in 1997.
The company occupies more than 50 acres, with total assets of 90
million yuan and more than 200 employees, including 96 engineering
and technical personnel.
Various processing and testing equipment: 8 meters, 5 meters, 4
meters vertical lathes, 8 meters, 5 meters, 3.15 meters gear
hobbing machine, 6 meters planer, precision boring machine, medium
frequency quenching and other larger processing equipment and
automatic welding, ultrasonic welding More than 300 sets of flaw
detectors, W15-23 material testing machines, aging vibration
devices, etc.
The main products are: various models and specifications of Jinma
brand crushers, ball mills, classifiers, magnetic separators,
dewatering screens, linear screens, screening machines, feeders,
vertical roller mills, etc.
Among them, 17 products have obtained national patents. Among them,
the crusher and ball mill have won many national honors.
The products are sold all over the country and exported to Russia,
Mongolia, South Korea, Chile and other international markets.
We are a member of the China Heavy Machinery Association, a member
of the Crushing and Grinding Association, a member of the Mining
Machinery Association, and a member of the China Building Materials
Machinery Association. We have participated in the formulation of a
number of equipment manufacturing standards.
The company's principles are: First-class talents, First-class
management, First-class machine, First-class quality, First-class
honor.
Sincerely hope to reach friendly cooperation with you.
FAQ to save your precious time!
Q1: Hi, are you a mining machinery manufacturer?
Answer: Yes, we are a professional manufacturer of mining machine.
Our company welcomes customers to visit our factory at any time.
Q2: How long is the warranty period of your equipment? Does your
company provide spare parts?
Answer: The warranty period of our machine is one year. For those
wearing parts, we guarantee to provide high-quality parts for a
long time.
Q3: How long does it take to deliver?
Answer: Production usually starts after receiving the advance
payment. Small machine is guaranteed to be delivered within one
month. Large-scale machine is guaranteed to be delivered within 2-3
months.
Q4: Do you provide machine operation guidance?
Answer: Yes. We have professional engineers for installation,
commissioning and operation guidance.
