HCDX-DM220 type AC magnetic yoke flaw detector equipped with strong
LED white light and LED black light
HCDX-DM220 type AC magnetic yoke flaw detector, ~220V direct power
supply, equipped with strong LED white light and LED black light,
can be used through the key selection, can be used for
non-fluorescent magnetic particle detection and fluorescent
magnetic particle detection. Small and exquisite, exquisite
workmanship, high detection sensitivity, easy to carry. Widely used
in aerospace, petrochemical, electric power and water conservancy,
railway construction, special equipment inspection and testing
industries.
Product features
Continuous Magnetization time more than 3minutes
Using superconducting magnet, light weight,1.6kgs
~ 220 v power supply directly, without the controller
UV and white light, can be common magnetic particle testing, also
can undertake the fluorescent magnetic particle testing, do not
need any outside lighting
High strength shell material, impact resistance, abrasion
resistance
Human body engineering design, reasonable structure
Leather shell, high-end atmosphere, feel comfortable
Use the high quality equipment, durable
Technical parameters
| Lift weight | ≥50N |
| Sensitivity | A-15/100 |
| Leg space | 50-200mm |
| Intensity of illumination of white light | ≥5000LUX |
| Intensity of illumination of UV light | ≥4000µW/cm2 |
| Size | 210×160×55mm |
| Weight | 1.6 kg |
| Power supply | ~220V/50Hz/60 Hz |
Standard package:
Main unit HCDX-DM220 ……………………………………….1pc
Fillet weld removable joints ………………………….………….1pair
Carrying case …………………………………………………….1pc
Instruction manual………………………………………………..1pc
Calibration certificate………………………………………….....1pc
Warranty
card….............................................................................1pc
Precautions and instructions for operation:
1. The instrument is simple to operate, plug in the power supply,
press the magnetizing switch can work. Press the magnetizing
switch, and the instrument will be illuminated by white light by
default. If fluorescent flaw detection is needed, it can be
converted by pressing the bright conversion button. The logic
relation of the button switch is: white light - purple light - all
out cycle.
2. The power supply is one-way AC ~220V/ 50Hz, do not connect the
wrong power supply, so as not to burn out the instrument;
3. It is necessary to avoid pressing the magnetizing switch without
load for a long time to avoid damaging the equipment.
