20rpm 0.5M3 Horizontal Double Screw Mixer 120kg/batch

Horizontal Double Screw/Paddle Groove Type Mixer

Groove shape mixer / horizontal ribbon mixer is suitable for mixing different advocate complementary material in chemical, food and other industrial department , it applies to mix semi-solid machine for the whole machine frame, transmission system is flexible, smooth operation, the part is surfaces which may touch the mixing materials are made of stainless steel, has the good corrosion resistance, can maintain the quality of mixed materials, no pollution, no discoloration.The transmission mechanism mainly uses the pot wheel, the pot rod, the gear transmission. Whiling using, it does not have the big noise, has the sufficient oil storage quantity, can obtain the good lubrication, and enhances the machine service life.The machine is controlled by electrical equipment, easy to operate and adopts automatic spot-feeding, which reduces the labor intensity of the operator.

​

Prodcut Working Principles and Features

1. This machine uses two motors, a stirring motor, which drives the mixing paddle to rotate the mixture material through the shaft. A discharge motor can be used to tilt the stirring tank to facilitate unloading.

2. There are one-way thrust ball bearings and radial thrust ball bearings at both ends of the stirring shaft to prevent radial turbulence caused by negative stress.

3. The sealing at both ends of the mixing shaft has been improved, and it can be completely sealed without contaminant material.

4. When jogging is used, it is easy to discharge, and it will not cause the phenomenon that the hopper tilts too much. The left end of the machine rotates. Because the worm wheel and the worm drive have self-locking effect, the mixing box can be dumped at any angle.

5. Add the raw material to the cylinder at one time, dry it for a period of time, add the adhesive or spray the liquid, or add the raw material and the adhesive to the working container at one time, and mix it into the ideal soft material.

Technical Parameters

Type	Total volume(m3)	Feed amount(kg/batch)	Overall dimension(mm)	Stirring speed(rpm)	Power formxing(kw)	Power for discharge(kw)
150	0.15	30	1480*1190*600	24	3	0.55
200	0.2	40	1480*1200*600	24	4	0.55
300	0.3	60	1820*1240*680	24	4	1.5
500	0.5	120	2000*1240*720	20	5.5	2.2
750	0.75	150	2300*1260*800	19	7.5	2.2
1000	1.0	270	2500*1300*860	19	7.5	3
1500	1.5	400	2600*1400*940	14	11	3
2000	2	550	3000*1500*1160	12	11	4
2500	2.5	630	3500*1620*1250	12	15	5.5
3000	3	750	3800*1780*1500	10	18.5	5.5

Product Application

1. Mixing of the previous steps in the production of tablets and granules in the pharmaceutical industry.

2. Mixing of the food industry, such as condiments, dairy products, spices, cakes, etc.

3. Mix of feed production.

4. Mixing of powders and liquids in the chemical industry.

Product Show

Contact Me

electrical, steam, natural gas or other

Jiangsu Guojin Drying Technology Co.,Ltd. specializes in the research and development and manufacture of drying, mixing, granulating, crushing, conveying, screening and other equipment. It has now become a large-scale enterprise in the drying equipment industry and a designated production enterprise of China Chemical Equipment Corporation. Especially, it has unique advantages in mesh belt type, hollow blade, disc type, rake type, fluidized bed, flash evaporation, airflow, spray, vacuum drying equipment, calcination, etc. Widely used in chemical, pharmaceutical, food, environmental protection, building materials, electronics, feed and other industries. Tens of thousands of users are spread all over the country and sold to more than then countries.

The company is located in Sanhekou Development Zone, Tianning District, Changzhou City, the birthplace of China's drying equipment industry. It is adjacent to Beijing-Shanghai Expressway, Shanghai-Nanjing Railway and Hengshan Crossing of Shanghai-Nanjing Expressway, 5km away from Shanghai in the east, Wuxi and Suzhou in the south, and the Yangtze River in the north.

The company has complete processing equipment. There are several sets of manufacturing equipment such as lifting, welding and cutting. It has excellent product development environment and production environment. The company has adopted advanced management methods and established a perfect quality assurance system.

Our company has established a set of perfect after-sales service system, which tracks and monitors all ex-factory products and the users are satisfied. "work with great care and keep improving" is the company's requirement for emplyees. Facing the increasingly standardized domestic and foreign markets, the company adheres to the corporate philosophy of "open competition, cooperative innovation, balance of interests and common development" and faces up to challenges with the belief of winning.