XM42 tiltable permanent magnetic chuck
USAGE METHOD
1. Wipe the bottom surface of the suction cup and gently place it
on the workbench of the machine tool withthe nameplate facing out,
and then fasten the base with the bolt pressing plate
2. Check or repair the parallelism of the working face of the
suction cup to the working surface of themachine tool
3. Place the workpiece on the working surface of the suction cup,
and then insert the wrench into the shaft hole and turn it 180
degrees clockwise to align the red mark with "on" to suck the
workpiece for processing.4. After the workpiece iS processed,
insert the wrench into the shaft hole and turn it 180 degrees anti
clock wise to align the red mark with "off' to remove the
workpiece.
MATTERS NEEDING ATTENTION
1. It is strictly prohibited to knock and scratch, and the surface
shall be cleaned before use to avoid affecting the accuracy.
2. Use ambient temperature -40 'C ~ 50 'C to prevent magnetic force
reduction
3. After use, the working surface shall be coated with antirust oil
to prevent rust.
4. Please pay attention to the safety when processing, pay
attention to the speed and the cutting amount(grinding amount) when
processing hard materials, so as to prevent the workpiece from
flying out.
Specification sheet
| Model | Dimensions (MM) | Processing angle | Net weight |
| A | B | C | D | E | F | 0 〜45° | N.W(kg) |
| XM42-100x175 | 100 | 175 | 85 | 75 | 20 | 0. 5+1. 5 | 0 〜45° | 10 |
| XM42-125x250 | 125 | 250 | 85 | 100 | 20 | 0.5+1. 5 | 0 〜45° | 12.5 |
| XM42 150x150 | 150 | 150 | 85 | 100 | 20 | 0. 5-H.5 | 0〜45° | 17 |
| XM42-150x300 | 150 | 300 | 85 | 100 | 20 | 0. 5+1. 5 | 0 〜45° | 25 |
| Note: Other specifications can be customized ,please call for further information. |
|
FAQ
Q: Are you manufactory or trade company.
A: We are both factory and trade company, we have lots of
Cooperation factory with different quality and prices, just tell us
your need, there is always a product suitable for you.
Q: Where do you located:
A: JYC technology Co.,Ltd. located at Wuxi City, Jiangsu Province,
1 hour by fast rail way to Shanghai City.
Q: Production time:
A: Normally,We'll have regular items in stock, customized products
will take 7-14 work days.
Q: Payment term:
A: TT, credit card, L/C, Western Union, Paypal and so on, we accept
all kinds of payment.
Q: What's your work time:
A: Normally, our work time is 9: 00 AM to 17: 00 PM Beijing time,
but if you have emergency, Please contact us freely at any time.
Our salesman will sulove your problem as soon as possible.
