Smooth Silver AZ80 ZK60 AZ91 Magnesium Alloy Billet Rod/ Bar
Magnesium alloy bar and magnesium alloy bar use:
1) Magnesium rods for magnesium alloy water heaters: Usually, the
best inner tank material is used in the water heater, and the
corrosion of the inner tank cannot be avoided. In order to protect
the inner tank and heating pipe of the water heater, many
manufacturers install magnesium rods for the water heater. It
protects the inner tank and prolongs the service life of the
electric water heater.
2) Magnesium rods for magnesium alloy batteries, such as the
negative electrode of an air battery, form a current and voltage
with the positive electrode to make emergency lighting and backup
power.
3) Magnesium rods for outdoor life-saving ignition. The US military
specifies that magnesium rods are used for ignition and ignition,
taking advantage of the activity and easy storage characteristics
of magnesium rods.
4) Magnesium alloy rods are used for machining parts, turning
parts, such as motor housings.
5) Sacrificial anode rod for hull protection.
6) Others.
Product advantages:
- Light weight. Magnesium metal is the lightest metal material in the
world .
- High specific strength .magnesium alloy has a high strength and
quality, it also has a certain bearing capacity.
- mall modulus of elasticity. has better strength and anti-seismic
and not easily distortion .
- Good anti electromagnetic interference and shield .
- Non pollution and recycle.
- Stable dimensionally and easy processing.
Magnesium Alloy bar Picture show:
Specification:
| Name | Type | specification | Remarks |
| magnesium alloy | AZ31B | Casting round bar billet(Φ90-800*2000) | According to the requirements of sawing and heat treatment |
| ZK61M |
| AZ80A |
| AZ91D |
| M2M |
| ME20M AZ40 |
Magnesium Alloy Chemical composition:
| Alloy Element | Type | Chemical Composition% | Other elements b |
| Mg | Al | Zn | Mn | Ce | Zr | Si | Fe | Ca | Cu | Ni | Be | Sub-total | total |
| MgAlZn | AZ31B | Balance | 2.5-3.5 | 0.6-1.4 | 0.1-0.2 | --- | --- | ≦0.08 | ≦0.003 | ≦0.04 | ≦0.01 | ≦0.001 | --- | ≦0.05 | ≦0.30 |
| AZ40M | Balance | 3.0-4.0 | 0.2-0.8 | 0.15-0.5 | --- | --- | ≦0.10 | ≦0.05 | --- | ≦0.05 | ≦0.005 | ≦0.01 | ≦0.01 | ≦0.30 |
| AZ80A | Balance | 7.8-9.2 | 0.2-0.8 | 0.12-0.5 | --- | --- | ≦0.10 | ≦0.005 | --- | ≦0.05 | ≦0.005 | --- | --- | ≦0.30 |
| AZ91D | Balance | 8.5-9.5 | 0.45-0.9 | 0.17-0.4 | --- | --- | ≦0.08 | ≦0.004 | --- | ≦0.025 | ≦0.001 | 0.0005-
0.003 | ≦0.01 | ≦0.30 |
| MgMn | M2M | Balance | ≦0.20 | ≦0.30 | 1.3-2.5 | --- | --- | ≦0.10 | ≦0.05 | --- | ≦0.05 | ≦0.007 | ≦0.01 | ≦0.01 | ≦0.20 |
| MgZnZr | ZK61M | Balance | ≦0.05 | 5.0-6.0 | ≦0.10 | --- | 0.3-0.9 | ≦0.05 | ≦0.05 | --- | ≦0.05 | ≦0.005 | ≦0.01 | ≦0.01 | ≦0.30 |
| MgMnRe | ME20M | Balance | ≦0.20 | ≦0.30 | 1.32-2.2 | 0.15-0.35 | --- | ≦0.10 | ≦0.05 | --- | ≦0.05 | ≦0.007 | ≦0.01 | ≦0.01 | ≦0.30 |
Advantage of Hilbo company:
Full range of product types, Ensure production capacity
We ave advanced die-casting, extrusion, forging, rolling, casting
processing production line and precision testing equipment. Can
produce a variety of types of magnesium alloy and magnesium alloy
products, and developed a high-strength magnesium alloy extruded
sheet. Through the purification of ordinary magnesium, magnesium
can be raised up to 99.99% of high purity.
Cost advantage
Magnesium alloy casting production can customized as your
requirement. the technical process is great, extrusion production
required for a variety of bar, no need to purchase from abroad,
extrusion molding products is easy molding, low energy consumption,
saving production costs.
Workshop:
Product technology advantages
Engaged in magnesium smelting technology personnel with more than
15 years experience, from the selection of primary materials to
smelting processing has a wealth of experience and mature
management techniques.
We are in magnesium ingots, magnesium alloy extrusion products have
technical research and development capabilities. We are come out in
front in the Magnesium alloy production enterprises
Testing Equipment
Our services:
1. Small order quantity available
2. Professional engineering team and sales team
3. Payment: T/T & Western Union
4. OEM/ODM Supporttable
5. Free samples provided
6. Competitive price and high quality
Certificate:
We have attained ISO9001 and ISO14001 certificates, Standardize and
improve the enterprise quality management system.
FAQ:
1. Q: Are you a factory or trading company?
A: We are direct manufacturer located in guangdong province, and
have our equipment!
2. Q: Are your products customized?
A: Yes,the products in the website are only the common type or the
previous types, we can supply the new products according to your
requirements or drawings.
3. I do not know how to use your product ?
Do not worry ! We can supply technical guidance together with
products.
4. Q: How can I get some samples?
A: Several samples are freely offered for buidling the business
long-term relationships and letting our customers believing the
quality of our products.
5. Q: How does your factory do regarding quality control?
A: Our factory passed CE, ISO, ROSH, UL certification.
