The machine is composed of worktable, hydraulic cylinder and height
adjusting mechanism, can feeding conveyor belt, lifting cage, cam
bracket, hook chain, lid conveying mechanism, can supporting plate,
sealing body, pressure head, sealing wheel, lid capping head, can
outlet conveying belt, can pulling wheel, transmission system,CIP
cleaning system, electrical system and other parts.
The filling parts are mainly composed of material cylinder, feed
pipe, return pipe assembly, filling valve assembly, height
adjusting component, tray component and transmission bracket.
When the empty can is input by the can feeding conveyor belt, the
can entering dial plate is opened by the dividing screw, and then
it is transferred to the lifting tray by the feeding dial. At this
time, the tray rises along the cam to seal the empty can and the
filling valve, and at the same time, the filling valve is opened
for filling process. When the can is full of liquid material, the
tray drops under the action of cam, so that the can and the filling
valve are disconnected, and the filling valve is closed at the same
time. In the process of filling, the filling valve is opened or
closed due to the rising or falling of the jar. In this way, the
machine can not be filled.
Technical parameter of can filling machine
Model | GF12-4 |
Capacity (can/Hour) | 6000 |
Suitable can size ( ml ) |
Can diameter: 54.9mm; 57.5mm Can height:134mm; 168mm
|
Can size | 200/202/206/209 |
Heads of filling | 12 |
Heads of sealing | 4 |
Compressed air:
| 0.4-0.8mpa, flow rate: 0.16m3/min |
Filling temperature(℃ ) | Normal temp |
Power source specification | AC380V/50HZ |
Power (kw) | 10 |
Overall dimension(mm) | 3450*1600*2150 |
Weight(kg) | 3450 |
Can tipper----It is used for turning over the can from top to
bottom,so it can be printed by the inkjet code printer.
