50m Pre-Terminated Cable LC/Upc - LC/Upc 6core 9.0mm Ofnp Breakout
Fiber Optic Patch Cord with Pulling Eye
DYS has been providing high-quality pre-terminated cables for
indoor and/or outdoor applications, with fanout number ranging from
12 to 144. Available connector types include MPO, SC, LC, FC, LSH,
and E2000, available fanout kits include steel-tube type, round
type, box type, barrel type, etc., and available fanout types
include bare fiber, 0.9mm, 1.2mm, 2.0mm, 3.0mm, etc. The fanout
length can be up to 10 meters, and the fanout tolerance can be as
small as 0.5cm.
Our indoor/outdoor non-armored Pre-Terminated Fiber Optic Cable
Assemblies are great choices for multiple applications inside or
outside. For those jobs outside, consider our outdoor non-armored
Pre-Terminated Fiber Optic Cable Assemblies for aerial or burial in
duct applications. If you're facing the most extreme conditions,
check out our outdoor armored direct burial/aerial and ADSS
self-supporting aerial Pre-Terminated Fiber Optic Cable Assemblies.
They will provide outstanding service and durability in all kinds
of conditions.
All of our pre-terminated cable products are tailor-made to
customers' specific requirements. We can fulfill any kinds of
customers' demands on products' specs including connector type,
fanout type, fanout length/tolerance, cable structure, etc., for a
wide range of applications including FTTC, FTTB, FTTH, FTTA, data
center, industrial, robotic, health-care fields, etc.
APPLICATIONS
Connected with trunk cables on one end, equipment port on the other end.
Connected with transfer modules on one end, equipment port on the other end.
FEATURES
100% pre-terminated and tested in factory to ensure transfer
performance
Rapid configuration and networking, reduce installation time
Supports 40G and 100G network applications
Jacket material: LSZH, OFNR, OFNP available
Supports up to 12F, 24F, 48F, 72F, 96F, 144F, customized products
are available
PRODUCT PARAMETERS
| Performance Level | Standard | Elite |
| Connector | Mode | Endface | IL(max) (dB) | RL(min) (dB) | IL(max) (dB) | RL(min) (dB) |
| LC/SC/FC/ST | SM | APC | ≤0.30 | ≥60 | ≤0.20 | ≥65 |
| UPC | ≤0.20 | ≥50 | ≤0.10 | ≥50 |
| MM | PC | ≤0.20 | ≥30 | ≤0.10 | ≥30 |
| Mechanical Properties |
| Item | Criteria | Conformance |
| △IL After 50 Matings | MPO/MTP | ≤0.3dB | GR-1435 |
| △IL After 500 Matings | LC/SC/FC/ST | ≤0.2dB | IEC 61300-2-2 |
| Min Bend Radius (Dynamic) | 20*OD (Cable Diameter) |
| Min Bend Radius (Static ) | 15*OD (Cable Diameter) |
| Environment Conditions |
| Item | Criteria | Conformance |
| Operation Temperature | -40~60°C | IEC 61753-1 |
| Storage Temperature | -45~85°C |
