Large Span Steel Structure Buildings With Mezzanine Steel Factory
Buildings
Project introduction:
This is a Large Span Steel Structure Buildings With Mezzanine Steel
Factory Buildings. It is used to produce and store biological
product. It has 4 spans. Each span is 28m width. It also has
mezzanine in side. Steel buildings are becoming increasingly
popular in the construction industry. Their durability, low cost
compared to conventional construction and the fact that they take
much less time to build than do other types of new construction.
You may find steel buildings used as warehouses, garages, barns and
livestock housing, aircraft hangers, factories and even residences.
Steel building prices can vary depending on a few different
factors, one of the most important being the price of steel at the
time.
Specification of steel structure material:
| Main Parts | Item Name | Specification |
Main Steel Frame |
Steel Column | Q235B, Q345B |
| H shape, Box, Steel pipe, Hot rolled sheet |
Steel Beam | Q235B, Q345B |
| H shape, Steel Truss, Hot rolled sheet |
Brace | Q235B, Q345B |
| Steel rod, Steel pipe, Angle steel |
| Roof Purlin | C or Z shape, Steel purlin |
Supporting System |
Wall Purlin | Q235B, Q345B |
| C or Z shape, Steel purlin |
| Roof | Single colorful corrugate steel sheet, Sandwich panel with EPS,
Rock wool, PU, Glass wool etc., |
| Wall | Single colorful corrugate steel sheet, Sandwich panel with EPS,
Rock wool, PU, Glass wool etc., |
Accessories | Bolts | Ordinary, High strength |
| Gutter | Galvanized Steel plate, Stainless steel |
| Windows | Aluminum alloy-Glass, Aluminum alloy-shutter, PVC |
| Doors | Sliding or Rolling door |
| Downpipes | PVC pipe, Color steel pipe |
| Edge Cover | Made of color steel sheet thickness 0.5mm |
| Ventilator | Stainless steel |
| Crane | Crane in 5 tons to 30 tons |
Advantages of steel structures buildings
| 1 | Steel structural material has high strength and light weight | The steel structure has high strength. Compared with the concrete
structure, the steel structure beam and the column cross-sectional
area are small, which can increase the effective use area.
Generally, the cross-sectional area of the high-rise steel
structure column accounts for about 3% of the building area, and
the cross-sectional area of the high-rise concrete structure
accounts for 7%-9% of the building area. |
| 2 | Steel structure construction speed is fast | Most of the steel structure is produced in the factory and
transported to the site for integral assembly by welding or
bolting. It can be used all day, because the steel structure itself
can be used as a load-bearing structure for the construction load
to reduce the formwork during construction, thus not only reducing
costs, but also greatly speeding up Construction speed. The
construction speed of the steel structure is about 1.5 times that
of the concrete structure. |
| 3 | Convenient pipeline layout | In the structural space of the steel structure, the truss type
member or the member having the cavity can be used, so that the
arrangement of the pipeline is convenient, and the replacement and
repair of the pipeline is convenient. However, if a concrete
structure is used, the beam should not be opened, and the pipe
generally passes under the beam, thereby occupying a certain space.
In the case of the same floor height, the floor height of the steel
structure can be smaller than the floor height of the concrete
structure, which can reduce the area of the outer wall. |
| 4 | The steel construction environment is less polluted | When steel structure is constructed, sand, stone, soil, cement and
other materials are rarely used, and pollution problems such as
dust flying, waste accumulation and noise are avoided from the root
wood. |
| 5 | Steel structure construction conforms to sustainable development
policy | The steel structure industry is a green-bag environmental
protection construction industry. Its utilization of resources and
energy is relatively reasonable, and has little damage to the
environment. |
Our service scope for steel structure project:
1. Structural steel fabrication, painting , galvanizing ,
pre-assembly
2. Designing, fabrication and installation for Prefabricated steel
structure building.
3. Deepen or design the fabrication drawing or shop drawing based
on your architectural drawing and construction drawing
4. Engineering consulting service
Packing and transport:
All the structure components, panels,bolts and sort of accessories
will bewell packed with standard package suitable ocean
transportation and loaded into 40’HQ.
All the products are loaded at the loading site of our factory
using crane and forklift by our skilled workers,who will prevent
the goods to be damaged.
