Acrylic Arm Single Bidirectional RS485 Flap Barrier Gate Access
Control
Single/Bi-Directional Security Access Control Flap Barrier
| Size | 1200x280x1000mm |
| Material | SUS304 Stainless Steel |
| Arm material | Acrylic Arm |
| Pass Width | 550mm |
| Passage direction | Single directional/Bi-directional |
| Pass rate | 30-35 persons/minute |
| Operating time | 1.5 seconds |
| Power input | AC100-240V,50/60HZ |
| Working voltage | 24V |
| Working humidity | ≤90%, no condensation |
| Working temperature | -15℃~+60℃ |
| Working environment | Indoor |
| Communication interface | RS485, Dry contact |
| Mechanism | DC Brush motor |
| Infrared sensor | 4 pairs |
| MCBF | 1,500,000 Cycles |
| Communication interface: | RS485 |
Features
1) With zero self-check function, it is convenient for users to
maintain and use;
2) Illegal entry has an alarm prompt function;
3) Anti-shock function, when the opening signal is not received,
the telescopic baffle (swing arm) is automatically locked;
4) Infrared/mechanical dual anti-pinch function, when the
telescopic baffle (swing arm) encounters resistance during the
reset process, the motor will automatically stop working within the
specified time, and the strength is very small, and an alarm signal
will be issued at the same time;
5) With automatic reset function, after the pedestrian reads the
valid card, if the pedestrian does not pass within the specified
time, the system will automatically cancel the pedestrian's
permission to pass this time;
6) A unified standard external electrical interface, which can be
connected to a variety of card readers, and can be remotely
controlled and managed through the management computer;
7) The entire system runs smoothly with low noise.
