Stainless Steel Ultrasonic Rotary Vibrating Screen with Ultrasonic
Deblinding System
Overview of Stainless Steel Ultrasonic Rotary Vibrating Screen with Ultrasonic
Deblinding System:
Stainless Steel Ultrasonic Rotary Vibrating Screen with Ultrasonic
Deblinding System is also called ultrasonic separator, ultrasonic vibrating separator, ultrasonic vibrating sieve,
ultrasonic sieve deblinding system, ultrasonic screener, ultrasonic
screen separator etc.
The ultrasonic vibrating screen solves the screening problem of
materials with strong adsorption, easy agglomeration, strong
viscosity, high static electricity, high density, super fine powder
etc. The screening accuracy can be increased by 1~100%, and the
output can be increased by 1~10 times, really meeting the
industrialization production of 100 mesh ~500 mesh and above.
It can be installed in various kinds of screening machines, such as
ultrasonic test sieve shaker, ultrasonic round separator,
ultrasonic rectangular separator, ultrasonic tumbler screen,
ultrasonic airflow centrifugal screen, ultrasonic gyratory screen
and so on.
Working Principle of Stainless Steel Ultrasonic Rotary Vibrating Screen with Ultrasonic
Deblinding System:
The ultrasonic deblinding system consists of ultrasonic control
power supply, ultrasonic vibrator (ultrasonic transducer) and
screen mesh with energy conduction ring.
The ultrasonic deblinding system uses high frequency electronic
frequency to convert into mechanical kinetic energy through the
transducer, which makes the screen produce vibration of high
frequency and low amplitude, and the vibration is transmitted
through the energy conduction ring rapidly to the screen. This
ultrasonic vibration can be conducted by the wire mesh of the
screen, in this way, each wire mesh is in the high-frequency
vibration, so it can prevent the blockage of small mesh, ensure
that the screen always keep the maximum aperture ratio in the
screening process. And it can also improve the liquidity of the
material and make it smoothly go through the mesh screen, exactly
solving the screening problems of strong adsorption, easy reunite,
high electrostatic, high fine, high density and light specific
gravity. Dry powder particle size can be classified to 25μm (600
mesh).
Ultrasonic Screening System of Stainless Steel Ultrasonic Rotary Vibrating Screen with Ultrasonic
Deblinding System:
The key technical components of ultrasonic vibrating screen is the
ultrasonic screening system, and the ultrasonic screening system is
divided into ultrasonic power supply and transducer.
(1) Ultrasonic Control Power Supply:
Power Supply: 220V 50Hz or 110V 60HZ
Working Frequency: 36KHZ
Operating Mode: continuous/pulse
Intensity Adjustment: 50～100%
(2) Ultrasonic Transducer:
The ultrasonic transducer is very important in the ultrasonic
system. Different transducers have quite different prices. The
ultrasonic transducers imported from Switzerland are more
expensive. But the quality is very good.
There are two kinds of installation form of ultrasonic transducer.
One is built-in transducer design, and the other is the external
transducer design.
Ultrasonic External Transducer Ultrasonic Built-in Transducer
Features of Stainless Steel Ultrasonic Rotary Vibrating Screen with Ultrasonic
Deblinding System:
1. Complete screen self-cleaning function. More than 500 mesh
screening, no mesh blockage, no screening efficiency attenuation.
2. While achieving high accuracy and high mesh screening, control
the narrow range of particle size.
3. It can be used with single layer and multi-layer. A smart
ultrasonic generator can use three transducers at the same time.
4. Ensure that the properties of the treated material remain
unchanged.
4. It can exactly solve the screening problems of strong
adsorption, easy reunite, high electrostatic, high fine, high
density and light specific gravity etc.
6. The screening accuracy can be increased by 1~100%, and the
output can be increased by 1~10 times.
Differences in Design Between External Transducer and Built-in Transducer:
| Item Compared | External Transducer | Built-in Transducer |
| Installing Form | The external transducer is mounted outside the screen frame and the
extending part is at the edge of the grid | The built-in transducer is fixed directly in the middle of the grid |
| Cleaning Method | Disassembly and cleaning are relatively convenient | When cleaning, people need to remove the screen frame, and then
lift the grid to clean up |
| Applicable Materials | The external transducer does not have direct contact with the
material, so it can protect the transducer effectively, improving
the service life, screening accuracy and output | The built-in transducer will contact the material during use. For some conductive and corrosive materials, contact with the
transducer will reduce the service life, and also affect the output
frequency, thereby reduce the precision and output. |
Ultrasonic screen frame and ultrasonic system are two key devices
of ultrasonic vibrating screen. The ultrasonic vibrating sieve
adopts adhesive type screen frame. Then how to glue the screen mesh onto the frame when replacing a
new screen?
The left photo shown above is the use of special tooling to stick
the screen to the frame. We can supply people such tool if they ask
for it. And the right photo above is the finished Ultrasonic Screen
Frame or Screen Holder (transducer external type). In addition, there are transducer built-in type ultrasonic screen
frame.
AAREAL ultrasonic system consists of generator, transducer, energy conducting ring, connecting nut and connecting wire. Voltage 220V/Single-phase/50HZ, working frequency 35KHz, Max. working current 0.5A.
Contact: Ms. Magie
E-mail: sale@aarealmachine.com
magiecn@gmail.com
WhatsApp/WeChat: 0086-15637361027
Website: https://www.aarealmachine.com
