OWB7095-24V 23kPa Small Turbo Air Fan 24VDC Brushless Blower For
Air Cushion Machine
Technical Parameters:
| Model | OWB7095-24V |
| Max.continuous operationg state |
| Rated voltage | 24VDC |
| Rated current | 12A |
| Power consumption | 288W |
| Free blowing speed | 38500rpm |
| Max.air pressure(Flow=0) | 23 |
| Power@Max.pressure | 100W |
| Speed@Max.pressure | 45150rpm |
| Max.air flow(Pressure=0) | 680L/min |
| Power@Max.flow | 260W |
| Speed@Max.flow | 40830rpm |
| Min air flow | 35L/min |
Air Blower Applications:
Air Purify System, Soiless Culture, Fuel Cell, Sprayer, Air Cushion
Machine, Dust Catcher, Cooling System, Hand Dryer, Plastuc Bonding
Machine, CPAP, BIPAP, Sputum Aspirator, Vacuum Cleaner, Seeding
Machine, Industrial Sewing Machine, Intelligent Toilet, Soldering
Device, Polishing Device, Car Vacuum, Truck Emission Improve
System, Medical equipment, Beauty air cooler, Sampling instrument,
Express air cushion machine, Expectorant vest....
Package:
FAQ:
Q: Can we connect this centrifugal air blower directly onto power
source?
A: This blower fan is with BLDC motor inside and it needs a
controller board to run.
Q: What kind of power source shall we use to drive this blower fan?
A: Generally, our customers use 24vdc switching power supply or
Li-on battery.
Q: Do you also sell controller board for this blower fan?
A: Yes, we can supply adapted controller board for this blower fan.
Q: How to change impeller speed if we use your controller board?
A: You can use 0~5v or PWM to change speed. Our standard controller
board is also with a
potentiometer to change speed conveniently.
Q: What is the MTTF of this centrifugal air blower?
A: MTTF of this centrifugal air blower is 20,000+ hours under 25 C
degree.
Q: Can we use this centrifugal air blower to suct water?
A: This blower fan can not be used to suck water. If you need to
suck water, you can ask us to
choose proper item for this special working condition.
Q: Can we use this centrifugal air blower to suck dust directly?
A: This blower fan can not be used to suck dust directly.If you
need to suck dust, you can ask
us to choose proper item for this special working condition.
Q: What can do if the working condition is dirty?
A: A filter is strongly recommended to assemble onto the the inlet
of the blower fan
Q: How to decrease the noise of the blower?
A: Many of our customers use foam, silicone to fill between blower
fan and machine to insulate
the blower noise.
For more informantion, please contact with us via email:
ivanzhu@junqitrading.com
