Durable Deuterium Lamp Power Supply , Visible Ultraviolet
Spectrophotometer DC Power Supply
Introduction:
The power supply also has control port allowing external control
signals (such as CPU or
manual) which can easily turn on or off the deuterium lamp.
OWPS series deuterium power supply has professional
anti-electromagnetic interference design, the
electromagnetic interference reach to grade A.
OWPS series deuterium power supply has two models,OWPS-02162.5
apply to the lamp at filament voltage
2.5V, OWPS-021610 apply to the lamp at filament voltage 10V.please
make sure you choose the right model for
your usage.
Environmental Requirement:
1. operating environment:
Temp.: 0-40℃
RH: 40℃(20-90)% RH
Pressure: 86-106 KPa
2. storage environment:
Temp.: -40-70℃
RH: 50℃ 90% RH
Pressure: 86-106 KPa
Technical Parameters:
Model: OWPS-02162.5
Voltage input :AC85~265V
Maximum Input Current: 0.5A
Filament Voltage: Preheat:DC2.5V, Working:0V
Maximum Anode Voltage: Preheat:DC125V, Working:DC80V
Anode Current: 300mA
Constant Flow Accuracy:0.05%(After Starting1h)
Minimum Trigger Voltage: DC550V
With standing Voltage: AC1500V/1Min
Turn off Signal: 3~12V/1mA
Dimension: 130*99*40mm
Net Weight: 0.4kg
Wiring:
Figure 1
Figure 1 AC input: L, N, PE( PE must be grounded)
Lamp: Filament-Filament-Anode
Control: ±
Signal:±
The Wire of the lamp must be well connected with the power supply!
The control Port has an optocoupler insulated with the power supply
as the circult abobe. Control Mode: High Level: Turn Off, Low
Level: Light Turn On. High Level Voltage Range DC3~12v, Current:
Above1mA
Signal Port is a Feedback Signal Of The Lamp light on or off, the
signal can be sued to CPU.
External Dimension:
Application:
The Deuterium Lamp Power Supply windely used in Landscape
Photometer, HPLC Detector, Capillary Electrophoresis, Flue Gas
Analyzer, Medical Equipment, Colorrimeter, Pollution Analyzer, etc.
More products information needing, please feel free contact with
us. email: ivanzhu@junqitrading.com
