Food Infrared Rotary Dryer,Food dryer machine,kill germs, keep
material sensor
To establish the most convenient and effective method to dry
tangerine peels, different methods (sun drying, hot-air drying,
freeze drying,
vacuum drying, and medium- and short-wave infrared drying) were
exploited. Our results indicated that medium- and short-wave
infrared
drying was the best method to preserve nutraceutical components;
for example, vitamin C was raised to 6.77 mg/g (D.W.) from 3.39
mg/g (sun
drying).
Moreover, the drying time can be shortened above 96% compared with
sun drying. Importantly, the efficiency of DPPH radical scavenging
was enhanced from 26.66% to 55.92%. These findings would provide a
reliable and time-saving methodology to produce high-quality dried
tangerine peels
What Can We Do For You ?
HOW TO WORK
1. Material Feeding 2. Rotary Drying 3. Discharging
Machine structure
1.Screw feeder Convey the material to the Infrared dryer drum
2.Material flow helix channelThe entranced material flow will go by welded helix channel on the
drum surface while the Infrared moduleum rotates. During the
processing, the material will be dried evenly by turning over and
conveyed out
3.Infrared ModuleUsed to provide a heat source to evenly illuminate the material.
4.Infrared Temperature detectorImported from Germany, the temperature information of
particles/Scraps in the drum will be fed back to Siemens PLC in
time to realize the intelligent regulation of temperature
5.Cooling air for Infrared modeulePrevent dust from adhering to the wall of the lamp tube, affecting
lamp life and heating efficiency; causing temperature difference in
the drum, which is conducive to the diffusion of water vapor
WORKING VIDEO OF INFRARED ROTARY DRYER
Machine Photos
Contact Us
HOW TO ENSURE THE QUALITY!
● In order to ensure the accuracy of each part, we are equipped
with a variety of professional processing equipment and we have
accumulated professional processing methods over the past years.
● Each component before assembly needs strictly control by
inspecting personnel.
● Each assembly is in charged by a master who has working
experience for more than 20 years
●After all the equipment are completed, we will connect all the
machines and run the full production line to ensure the stable
running in customers' factory
Our Service
1. We will provide testing if the customer comes to visit factory
to see the machine.
2. We will provide detail machine technical specification ,electric
diagram,installation,operation manual and all the documents which
customer needed for clearing customs and using the machine.
3. We will provide engineers for helping installation and training
the workers at customer's site.
4. Spare parts are available when they are needed .Within warranty
time,we we will provide spare parts free,and over warranty time,we
will provide spare parts with factory price.
5. We will provide technical support and repair service in the
whole lifetime .
