Temperature Directly Controlled Mineral Insulated Electric Oil Drum Heater

Temperature Directly Controlled Mineral Insulated Electric Oil Drum Heater is a special electric heater of mineral insulated heating cable with heating temperature directly controlled for the oil drum.

I. Overview of oil drum heater:

The viscous liquid or frozen content in the barrel can be easily taken out after heating the outside barrel wall. The materials include adhesive, grease, tar, paint, paraffin, oil and various resin raw materials. By heating the barrel body, the viscosity drops so that the circulation pump output can be reduced. Therefore, the device is not affected by season and can be used all year round. Oil Integrated with thermostat controller, Oil Drum Heater working temperature can be adjusted and controlled.

Two, the characteristics of the oil barrel heater:

The surface of the oil drum heater is equipped with a temperature controller, through which the temperature is directly controlled (generally 30-150 degrees). It is commonly used for heating and heat preservation of 200 litre standard oil drum, and is also widely used for heating of other drums and heat preservation of valves.

Three, the oil barrel heater working principle:

1, the product is mainly composed of mineral insulated metal sheathed heating cable with the properties of fast heating, high thermal efficiency and long service life.

2, electric heating element wound on E-glass fiber core frame with silicone rubber as main insulation which performs well on heat resistance and reliable insulation.

3, the product has excellent softness, can be directly wound on the heating device with good contact and even heating.

Four, oil barrel heater product parameters:

1. The highest heat-resistant temperature of insulating material: 250℃

2. Recommended temperature: ≤200 ℃

3. Insulation resistance: >50mΩ

4. Dielectric strength: >1500V/1min

5. Power deviation: ± 5%

Five. Product specifications of oil drum heater:

Six. Installation requirements of oil drum heater:

1. When installing, the silicon rubber surface of the electric heater should contact with the surface of oil drum and tank completely.

2. In order to reduce heat loss, an insulation layer should be added to the outer side of the electric heater.

3. Overlapped or wound installation is strictly prohibited to prevent overheating and damage.

Pasia Industries is a scientific and technological enterprise specializing in researching, developing, producing, installing and providing technical consultation and service for mineral insulated heating cables, heating elements and finished heaters as well as welded honeycomb products for filtering, shielding, sealing and guiding. Located in Puyuan high-tech park, Zhejiang province, it covers an area of more than 10 hectares, with a construction area of more than 50,000 square meters. It possesses a convenient transportation, about 150 kilometers from Shanghai in the north and 40 minutes from Hangzhou Xiaoshan international airport in the south.

With the most professional production lines and the highest automation level in China, Pasia produces mineral insulated heating cables, heating elements and finished heaters, honeycomb cores of stainless steel, brass, nickel, aluminium and other metal or metal alloys according to international standards. Pasia is one of the top four professional manufacturers of industry in the world on capacity and sales. As leading technological products, they possesses advanced properties of good quality, many varieties, full specification range, wide application, long service life, good safety and easy maintenance etc., and have been successfully applied to oil and gas (extraction, transportation, storage, etc.), chemical industry （petrochemical industry, fine chemical, pharmaceutical, etc.), power (nuclear power, solar power, etc.), construction (melting ice and snow), railway, aviation, metallurgy, electronic and et al for the applications as heat tracing and heating, detecting, signaling, power transmission, as well filtering, shielding, guiding and sealing. The company has become one manufacturer of the few in the world of completely electric heating technology and products of four categories including constant wattage, temperature self-regulating, MI heating cable and skin effect resistance and one of the top three wire electric heating products suppliers. The honeycomb core has been widely used by many clients on filtering, water treatment, structure platform with high requirement on flatness, shielding, turbine sealing and straightening etc. It can not only provide complete categories of professional products, also provides customers with solutions, consulting, project reply, EPC project general contracting services which can even be extended to the services including safe operation for maintenance etc. So far, the company has possessed 25 related patented technologies, 13 national new products, and 12 national technological innovation projects.

Upholding a company spirit of leading innovation and win-win cooperation, Pasia has become one of the few in the industry who possesses complete capacity of research and development, design, production and installation of mineral insulated heating cable and its heating equipment, honeycomb core and its parts or modules both home and abroad, relying on professional team, advanced management means, close work with related universities, design institutes and scientific research units, industry leading R&D testing capacity, under the ISO9001 quality system. After several years’ hard and persistent efforts, Pasia have the ability to supply a complete set of products, excellent technical support and perfect follow-up service. A variety of products have not only been applied to meet the requirements from domestic market, but also exported to many countries and regions such as Europe, Asia, Africa and America to serve different categories of purposes. It receives a high visibility and reputation from the industry. Over the past years, the company has involved in thousands of projects from all walks of life, among which the most influential ones are:the explosion-proof natural gas electric heater at Datong natural gas gate station in Shanxi province; Electric heater for paint material for the production bases of Hempel (USA) paint company in Kunshan and Guangzhou; Electric heaters for Tongyi chemical system in Beijing, Lanzhou, Shanghai and Shandong; Complete heating and tracing equipment for large oil and gas fields in Jiangsu oilfield, Benin, Angola, Thailand, Myanmar, Kazakhstan, the UK, Canada; the wind or water tunnels of honeycomb core in Singapore, India, USA and UK, shielding honeycomb core applications from many foreign countries, honeycomb seals for the turbines from Russia etc.

Insists on serving market with sincerity, securing quality with technology, leading innovation with study and driving development with passion, Pasia has become a well-known provider of advanced heating technology solutions at home and abroad, and one of the fastest growing members in the industry.