8 Inch Wireline Torsion Tester For Torsion Experiment Instrument
I.Introduction
Wireline torsion tester is used for torsion experiment instrument,
wire line breakage by torsion test count
when the standards set by the number of turns and wire twist off
laps, qualitative judgment test whether
wire can continue to use.
II.Parameters
A wireline torsion tester is designed for the purpose of testing
wireline strength.
Usually 8”(Length) wirelines is selected as a specimen. Then, fixed
both ends and rotated in the same
direction.
For 0.092” wireline, rotate 25-28 circles, 0.108” with 20-25
circles, 0.125” with 16-18 circles.
If the wireline splits, it verifies good quality.
If the wireline splits before finishing testing, it shows the
hardness of wireline is too high or it is corrosive.
If the wireline does not split but presents twisted structure after
tesing, it means the wireline is too flexible.
If the wireline shows both twisted structure and straight
structure,that means heterogeneous hardness and
flexibility.
Suitable for wireline diameter: 0.092 ", 0.108 ", 0.125"
Total weight: 4.6kg
Length × width × height (mm) : 452.5×112×76.5
Application method
