FIG 1502 CHIKSAN SWIVEL JOINTS
2).working pressure:6000-20000psi(42Mpa-140Mpa)
3).working temperature: -29°C~121°C.
4).application enrvironment: standard or H2S
5).Standard: API standard
1 Our swivel joints, with integral ball bearing, are manufactured on
the basis of technologies from FMC, USA.
2 Various models of swivel joints and their repair kits are
available, suitable for normal or low temperature, or H2S
environments, with sizes ranging from 2" to 4" and rated WP ranging
from 6000-20000psi(42Mpa-140Mpa).
3 We can supply long and short radius swivel joints. Long radius
swivel joints can minimizefluid shock, and has better performance
of resistance for scouring and erosion. We also need to use short
radius swivel joints for low pressure operation due to limited
installation space.
4 Patterns of swivel joint are made in NC machine tools, with even
wall thickness and longer service life. Wall thickness difference
of inner and outer arcs can meet FMC standard.The three-ball-race design can bear heavy load stably, and ensure
less vibration with variable load.
5 All sizes of swivel joints can be interchanged with FMC equivalent
products used in cementing and fracturing equipment.
6 Sealing parts made of synthetic rubber with release hole are
fitted with blowout preventing metal ring. When sealing parts leak,
pressure will be automatically relieved. Safety performance is
enhanced.
7 Usually good lubrication can ensure that swivel joints work
normally without much maintenance.
