NC NO Customized Two Coil Disconnect Relay Latching Relay 90A Smart
Meter Relay
Notes: IM901 is a high-power 90A magnetic latching relay, which is
a kind of electromagnetic relay. With compact size and sealed
cover,
it can be customized into single or double coils, 6/9/12/24 Vols,
what's more the external terminal design can be tailored 100%.
1.Overview:
● Brand Name:IVY
● Model Number:IM901 90A Relay,32 to 200 ampere switching capacity
● Theory:Electromagnetic Relay
● Usage:Protective
● Size:Miniature,Compact design and high compatibility
● Protect Feature:Sealed
● Contact Load:High Power
● Fast remote switching
● Terminal type:OEM / ODM
● Coil type:1 or 2 Coil
● Coil voltage:6 / 9 / 12 / 24 volt dc
● Coil polarity:Positive/ Negative
● Lowest contact resistance for highest grid efficiency
● Confirmed to TUV IEC60255-31 UC3 and CE, ANSI and NMI standards
● Application:Widely used for smart meter,smart grid,solar panel,EV
charger,switching cabinet,RCCB/RMB,lighting systerm
circuit protection,electrical machine
2.Specification:
| Dimension(mm) | 38×30×16.5 |
| Weight ( g ) | ≈33g |
| Contact Arrangement | 1A/1B |
| Contact Material | AgSnO2 |
| Ambient Temperature | -40~+70℃ |
| Ambient Humidity | 45%~90%RH |
| Vibration | 10~55Hz,1.5mm(DA) |
| Nominal Voltage | 6~48VDC |
| Power Consumption | Single Coil:1.5W, Dual Coil:3W |
| Max. Switching Voltage | 250VAC |
| Max. Switching Current | 90A |
| Max. Switching Power | 22500 VA |
| Contact Resistance | <2.0 mΩ |
| Insulation Resistance | 1000MΩ(DC 500V) |
| Dielectric Creepage | 10mm |
| Dielectric Strength | Across Open Contact | ＞2000VAC 1min |
| Coil to Contact | ＞4000VAC 1min |
| Electrical Life | ＞10,000cycles |
| Mechanical Life | ＞100,000cycles |
| Picking-up & Release Time | ≦20ms |
| Pulse Duration | ≧100ms |
| Functional Shock Resistance | 10G |
| Destructive Shock Resistance | 100G |
3.Application Notes:
3.1. Suggestions of relay’s input
(1) Polarity-Please check the polarity inside of our technical
specification, if single coil then”+ -” or “- +”are fine, you can
change it by one pulse.
If double coil then it‘s necessary to confirm “-+-” or “+-+“before
leaving the our factory.
(2) Driving-Please energize the relay at our recommend pulse width,
rated voltage for reliable performance,
if 1.5 time or 2 times of value or lower driving condition plz
confirm with our engineer.
(3) Relays’contact status may be changed during transportation or
installation due to impact of external force, therefore please
reset to the required status.
3.2 Suggestions of relay’s output
(1) When choosing the relay with hard connection,please avoid the
external force on load terminals during or after the installation.
(2) When the relay will be connected with screw or bolts to the
relays’ terminals,
plz make sure your connection is fastened and prevent relay from
damages or other safety problems due to temp. Rise..
(3) The sampling signal wires of products are limited, please do
not pull or torque during installation.
4.Why Choose Us
5.FAQ
Q1: What kind of product and service do you have?
We provide all kinds of electronics including power relay, latching relay, change-over switch, current
transformer, shunt, smart sensor, communication & power supply
module, transformer etc.
The manufacturer of meter instrument, electrical device, EV
charger, medical equipment can find one step solution here.
Individual buyer,distributor or (sole/ designated) agents are also
welcomed by us.
Q2: Are you are factory or trading company?
We are the manufacturer,designer and sales company. Our own factory
was located in Tongxiang city of Zhejiang province.
For our history plz click About us or watch IVY factory video on
Youtube.
Q3: Whether the price will change greatly?
To business customers, we mark price can be negotiated here as huge
demand.
Usually we will not change the prices unless some force majeure
such as trade war, exchange rate change greatly etc.
Q4: Can you offer customized solution, how should I get a quotation?
Yes!We can offer customized products especially when we supply EV
accessories and meter accessories. To get a quoation plz kindly
offer your basic company info for registration and offer your
drawing.
It usually takes 12 hours to 48 hours to filnish the design and
drawing (If complicated then plz refer to pracatical situation).
Q5: How do you handle the quality problems?
We are proud of our quality! If any accidents on quality, we have
before-sales, in-sales and after-sales service. And every customer
will have your own sales expert and technical support.
