Commercial Wall Mounted Dehumidifier With Intelligent Control Panel
Product Description
1. Functions
1) Microcomputer Automatic Humidity Control Function
2) LCD Display of Current Environmental Temperature and Humidity
3) Efficient automatic frost system, low temperature application
4) Special humidity 1% RH adjustable function
5) 1-24 hours timed shutdown function
6) Open-window hydrophilic aluminum foil fins, greatly improving
heat transfer efficiency
7) Intelligent control system can quickly judge the cause of
failure
8) Centrifugal fan, strong wind, uniform air flow, low noise
9) International brand compressor, stable performance, durable and
strong dehumidification effect
2. Parameters
| Article No. | CFB6.0D |
| Article Name | Industrial Dehumidifier |
| Dehumidification capacity | 6Kg/h |
| Applying Area(with three meters height) | 150~180M² |
| Voltage | 220V~50Hz |
| Rated Power | 2000W |
| Air Circulation | 1500M³/H |
| Refrigerant | R22 |
| N.W.(KG) | 80KGS |
| Model Dimension | 972*330*1000MM |
The displacement required for R-22 is 60% of that required for
R-12.This means that for a given compressor rate, the system using
refrigerant R-22 generated 65% more cooling capacity than the
system using refrigerant R-12.
Higher cooling efficiency and lower power consumption are important
in large industrial applications.Insoluble impurity in refrigerant requires that refrigerant has
certain water absorption. When little water penetrates into
refrigerant, ice jam will occur at low temperature and affect the
normal operation of refrigeration system.The refrigerant R-22 absorbs more water than R-12, which is
important in cryogenic applications.
Company Information
In the process of transportation and placement of industrial
dehumidifier, there will inevitably be vibration, roll and other
actions, resulting
in the displacement of refrigerant in the compressor.If the machine
is turned on at this time, the compressor will not work normally,
the noise
will be large, and the dehumidification efficiency will be
relatively low.Therefore, it is necessary to stand the dehumidifier
for a period of
time, so that the refrigerant in the compressor can be reflux in
place before it is used.
After opening the dehumidifier, it should be kept in standby state
as far as possible, and do not open and close frequently, so as to
greatly
reduce the damage to the machine performance and not waste a lot of
electricity.After power failure, it is necessary to turn off the
power
immediately to prevent the sudden power call and the sudden impact
of large current on the dehumidifier and damage the dehumidifier.
In terms of placement, it is recommended to place the dehumidifier
in a place with air circulation and flat ground, and put it next to
the
wall.In this way, the moist air is pumped into the dehumidifier as
soon as possible, and the dry air can be quickly circulated to all
corners of
the workshop to achieve better dehumidification effect.
