High perfomance explosion proof jet mud mixer working at
0.25-0.4mpa pressure
Summary of jet mud mixer
Jet mud mixer is special equipment to prepare and increase the
drillinf fluids weight by adding and mixing bentonite, change the
fluid density, change the mud density, viscosity, and dehydration.
The unit includes one centrifugal pump, one jet mixing hopper and
one jet mixer that are installed in a base with pipe valves.
APSLH series jet mud hopper unit are welcomed by clients for good
price and high performance. Also, we have short delivery and many
models for you to choose from. Nowadays our jet mud mixer is widely
used in oil and gas drilling, horizontal directional drilling,
tunnel and microtunnelling, shield construction, etc.
Specification of APSLH series mud hopper unit
| Model | Capacity(m3/h) | Pressure (Mpa) | Motor(Kw) | Inlet (Inch) | Outlet (Inch) | Weight (Kg) | Dimension L×W×H(mm) |
| APSLH150-50 | 272(1200GPM) | 0.25-0.4 | 55(75HP) | 8 | 6 | 1675 | 2200×1840×1100 |
| APSLH150-40 | 150(660GPM) | 37(50HP) | 6 | 6 | 1460 | 2200×1840×1135 |
| APSLH150-35 | 90(400GPM) | 22(30HP) | 5 | 4 | 1167 | 1850×1540×1000
|
Jet mud mixer features and benefits
High mixing capacity. Put the drilling fluids material (bentonites,
barite power ) and the corresponding chemical addtives (polymer)
into circulation tank for increasing the total
Able to handle high back-pressure
Which is designed to be economical, simple, robust, reliable and
wear-
APSLH mud hopper unit characterstics
Jet mud mixer can change the density, viscosity and water loss
effectively, and also enhance material dispersion effect, improve
the mixed liquid pressure head.
Sand pump and jet mixing hopper can either be combined or be
installed separately, and they are connected by pipelines and
valves. Seals adopt packing and mechanical double seal, with good
sealing performance.
Single jet mud mixer is made up of one sand pump, one jet mixing
hopper that are installed in a base with pipe valves. Duplex jet
mud mixer is composed of two sand pumps and two jet mixing hoppers.
How to select and what impact mud mixing hopper unit impact
First we shoud confirm treating capacity we need. And for oil and
gas drilling kindly suggest 150m³/h flow rate. Then confirm
pump,neceddary pipelines and also can depends on suppler suggestion
Mixing hopper hydraulic consumption should be as little as
possible, otherwise the flow rate may decrease by too much
Distance between Venturi hopper and nozzle should be proper. The
optimal distance should be 32~90mm
Output pressure should be designed properly. If the discharge port
pressure is too high the flow rate of mixing pump will be lower
than expected
The higher pressure at inlet port the higher flow rate of mixing
hopper
The higher hopper mounted the lower mixing capacity
If you have any demand of mud mixing hopper unit ? Please contact
AIPU Solids freely. Trust you will get the true cost effective
solution at the best rate.
