316 L Finest Bubble Porous Metal Sparger Sintered Metal Sparger
Porous metal sparger
Along porous metal can produce miniature, the slow-moving
bubbles-the best method of achieving high-efficiency gas/liquid
contacting. For decades, porous metal spargers have been the fast,
reliable, cost-effective choice for gas/liquid contacting in all
sorts of industries.
Small bubbles transfer gases faster, more efficiently
Porous spargers introduce gases into liquids through thousands of
tiny pores, creating bubbles far smaller and more numerous than
with drilled pipe and other sparging methods. The result is a
greater gas/liquid contact area, which reduces the times and volume
required to dissolve gas into a liquid.
With thousands of pores over the surface of porous metal sparger,
larger volumes of gas can be passed with a very high specific area.
The porous metal sparger is made of titanium and stainless steel
316L, to provide long-lasting operation even in the midst of
temperatures as high as 600 ℃under oxidizing conditions.
Porous metal sparger creates millions of small, slowly rising
bubbles, with significantly more surface area, resulting in more
complete and rapid mass transfer.
Simple, cost-effective, easy-to-install
sintered Porous sparger typically consists of porous metal
elements, a threaded fitting, and, in longer units. The design is
simple, without moving parts.
Oxygen striping, using nitrogen
Actual performance data shows the superiority of sintered porous
metal spargers, compared to drilled pipe spargers. Much higher
performance levels with significantly lower gas consumption.
