Product Features:
1. Renewable
The water/ground source heat pump is an air conditioning system
that uses the solar resources stored by the earth as a source of
cold and heat. The soil and water on the surface naturally maintain
a relative balance of energy acceptance and divergence. The
successful use of ground source heat pump technology makes it a
reality to use the almost unlimited ground energy stored in it.
2. Energy efficient
The groundwater temperature used by the water/ground source heat
pump is 10-16℃ in winter, which is higher than the ambient
temperature, and 18-30℃ in summer, which is lower than the ambient
temperature. The efficiency of the unit is greatly improved, and it
can save energy by 30-40% Expenses, inputting 1KW of electric
energy can get more than 4KW of heat or more than 5KW of cold.
3. High environmental and economic benefits
When the water/ground source heat pump unit is running, it does not
consume or pollute water, and it does not need to burn fuel, which
has significant environmental benefits. Compared with air source
heat pumps, it can save energy by more than 40%, and compared with
electric heating, it can reduce energy by more than 70%.
4. Wide operating range
The water/ground source unit has a wide operating range and is
suitable for air conditioning and heating. It also has outstanding
performance in industrial cooling, heating, and waste heat
recovery. The heat source inlet temperature of the unit is 8~35℃,
and it can provide 7℃ chilled water and 45~60℃ or higher
temperature hot water
Product Performance:
A. Optimized design
Fully follow international standards, combined with Chinese design,
and actual national conditions.
The technical idea of "large temperature difference, small flow"
saves resources to the maximum for users.
The system adopts independent modules and has high reliability.
Computer-aided optimal design to ensure that the unit is in good
condition under any working conditions.
B. Sophisticated options
Imported compressors and refrigeration components to ensure
efficient and reliable operation of the unit.
The high-quality controller combined with the special control
program of the water source heat pump is more convenient in terms
of intelligence and networking.
The high-efficiency heat exchanger is jointly developed with
professional supporting manufacturers.
C. Simple operation and reliable operation
Fully computer-controlled and equipped with a backup manual
operating system.
Perfect computer control and multiple protections make the whole
machine safe and reliable.
D. Flexible and convenient parameter setting
More than 80 variable built-in parameter settings can adjust the
working status of the unit at any time.
Power-off memory protection can maintain the continuity of the
running state.
1) The cooling capacity of the unit and the power consumption
calibration conditions of the compressor: evaporator inlet and
outlet water temp (12/7°C), condenser inlet and outlet water
temp(18/29°C)
2) The standard pressure-bearing capacity of the condenser,
evaporator and heat recovery device`s water circuit is 1.0MPa, and
the fouling factor: 0.086 ㎡°C/kW
3) If the specifications listed in this table change, please excuse
for no notice
