Laser Engraving Marking Smoke Purifier Mental Frame Structure Noise
Canceling Design Machine
Features:
1.All three filters can be replaced separately
2.Rapid purification by multi-layer filtration
3.Can maximize the use of filters
4.Universal smoking arm, random orientation positioning
5.Special alloy impeller, anti-corrosion, stable operation
Instructions:
| Power(W) | 350w |
| Dimension(mm) | 550*415*920 |
| Air Flow(m3/h) | 450 |
| Noise(db) | <70 |
| Voltage | 110/220 |
| No-load speed(r/min) | 4200 |
| Wind spped(m/s) | 19 |
| Weight(kg) | 52.5 |
| Negative pressure(pa) | 2500 |
Advantages:
1. High negative pressure, high flow, small volume, light weight,
easy installation, flexible filter replacement.
2. Long service life, low cost, continuous 24-hour work, can use
40000 hours (i.e. normal use for eight to ten years)
3. Low cost basis: as low as 1.85 yuan / day (8 hours / day)
4. Multi layer filtration, rapid purification, filter failure sound
and light alarm.
5. Independent research and development of hall less brushless DC
motor, high efficiency, long life, zero consumables and zero
maintenance, support continuous 24-hour use.
FAQ
Q:Does the size of the pipe affect the effectiveness of smoking?
A:Yes, and the impact is very large, because the increase of the
bend resistance will be stronger, resulting in the weakening of
suction, should be as far as possible to reduce the bending of the
pipeline.
Q:Is the product influenced by the environment that affects the
smoking effect?
A:Yes, such as fan flow, air conditioning (air flow); Long
distances can also seriously affect the effects of smoking
Q:If the influence of fans and air conditioners is unavoidable,
what methods can be used to solve the problem?
A:Use a smoking hood to block the influence of peripheral wind (air
flow) on it
Q:How far is the smoke cover from the smoke point of the smoke
purification system better?
A:Smoking cover (mouth) with the distance of unborn smoke point is
better in 5-15 cm.
Q:Can the filter element be replaced separately?
A:Yes, each layer can be replaced independently
Q:Is it difficult to install the product? Do you need a
professional to install it?
A:Small equipment refer to the manual, connected to the power
supply can be used. No professional installation is required. Large
equipment XL-3000/XL-5000 will be installed by professional
personnel on site.
Q:Is the purified air discharged indoors or outdoors?
A:Both indoor and outdoor, according to your requirements, usually
indoor, our products are in line with the indoor emission
standards.
Product part picture:
