Dust Fume Collector For Laser Polishing Cutting Machine 350w
Observing Window Organ HEPA Filter
Features:
1.Microcomputer chip control, safe and efficient, stable and
durable, more secure remote control operation
2.Multilayer filter design,make sure more thorogh purification
3.Brushless DC moter,stable long service life
4,Noise canceling design,quieter working place
5.Special alloy impeller, anti-corrosion, stable operation
Instructions:
| Power(W) | 350w |
| Dimension(mm) | 550*415*920 |
| Air Flow(m3/h) | 480 |
| Noise(db) | <70 |
| Voltage | 110/220 |
| No-load speed(r/min) | 4200 |
| Wind spped(m/s) | 21 |
| Weight(kg) | 42 |
| Negative pressure(pa) | 2500 |
Advantages:
1.Microcomputer chip control, safe and efficient, stable and
durable, more secure remote control operation
2.Noise canceling design,quieter working place
3.Noise canceling design low noise,only the volume of ordinary
speech,More quiet workshop, reduce the surrounding complaints.
4.Replaceable tube and hood,choice suitable accessories, various
specifications tube various materials hood.
FAQ
Q:Can it be used in extremely humid or corrosive environment?
A:No, because in a particularly humid environment, moisture or
corrosive gas will damage the filter element and the internal
components of the machine; but usually in spring, humid weather,
such as "southerly days", will not affect the use.
Q:Can it be used in high temperature environment?
A:The high temperature should be divided into instantaneous high
temperature and long-term high temperature, the temperature within
60 degrees can be used; the temperature over 60 degrees for a long
time is not recommended, because it may lead to fire.
Q:When the filter element needs to be replaced, will it give an
alarm?
A:The indicator light of digital display control panel will flash
red light and give out alarm sound.
Q:Can the pipe of smoke and dust move back and forth with the laser
head?
A:In principle, it can, but it can't if auxiliary gas is needed
Q:Can water cutting match your purifier?
A:No, because the humidity of the gas and dust inhaled by the air
inlet is 40% - 80%, too high humidity will cause the filter element
to fail quickly and the circuit inside the machine to be damaged.
Q:Can the filter element / collection bag / drum be washed?
A:No, because most particles are insoluble in water
Q:In the case of cutting hard materials, will the small pieces cut
be filtered?
A:No, the purifier is equipped with stainless steel fire net, so
the small pieces can't enter the interior of the purifier
Product part picture:
